I thought you mightI like the new bearing flanges and engine plate better. If that makes a difference.
Heh sure, come down to cali sometime when we don’t have a fire going onCan I borrow Max for a while? My dog gets along with cats, but the mice around here drive him nuts.
What do you mean by supports?You better add some support out to the ends of that axle or it will fold like a cheap suit. Also add some spacers to keep the axle centered.
Hmmm good to knowThe frame is so narrow, and there is so much axle hanging out from the narrow frame......any particular weight or hard bounce could bend the axe.
He's suggesting widening the frame around the axle, or extending the width of the frame so that the axle is braced only inches inside the tire.
Da Flash
Yup, Red understood what I meant. And locking collars no matter how good they are won’t keep the axle from sliding around. It’s best to cut tubing to slide over the axle to fit between the bearing and wheel/hub.The frame is so narrow, and there is so much axle hanging out from the narrow frame......any particular weight or hard bounce could bend the axe.
He's suggesting widening the frame around the axle, or extending the width of the frame so that the axle is braced only inches inside the tire.
Da Flash
More good advice, keep it comingYup, Red understood what I meant. And locking collars no matter how good they are won’t keep the axle from sliding around. It’s best to cut tubing to slide over the axle to fit between the bearing and wheel/hub.
Aw come on Denny, don’t get political on me. I know you’re better than that. It’s actually not as bad as you might think, plenty of hot rodders to hang with. At least in the crowds I run withOh, I’m full of it!
I try to stay out of Cali. Too many wierdos like Pilosi and such.
Now THAT would be somethingI hope she is pretty!
Playing with go karts: check. Maybe I need to work out, so far all the skirts seem to be faster than meAt your age you should be playing with gokarts and chasing skirts. I was 47 years ago!