Search results

yes

check mc-scam-mastercarr.com?

If you are riding on gravel or dirt, single wheel is gonna suck. Stick with the live axle, its what the frame was designed for, its way less of a headache.

Or, use sendcutsend.com to mail your self angle brackets that bolt onto the straight sections. However, you'd need to create a 3D model and scale it, along with an understanding of how it would be manufactured.

Thank you.

could you use a propane tank? and could you fill a bowl with CO2, then weld down in it to avoid having to flow gas?

This thing:

Preface; I AM LOOKING FOR SOMEONE ELSES BUILD. I am not building this (yet). An old timer at the track told me that someone once built a 800 HP Hayabusa motor powered go kart with white trimming that ran low 8's in the quarter mile. The only information I found on it was a bad photo. Does anyone...

Sparkwizard is making the point that Fluxcore forms ugly, weak welds. IF its all you have, then sure, or if you HAVE to build a frame to make this count for your senior project, then fine. But you're setting up for all kinds of issues (frame bending/snapping, axle bearings not aligning, mounts...

Stretch an already existing frame. There are several accounts of taking cheap chinese quads and stretching the frames to accomadate a seat.

The great triangle of Cost, Effort, and speed.

Awesome! Welcome. I. Hope. You. Find. All. You. Need.

nah, they're miatas

Welcome! Pictures of your switch bank and what you're connecting would be handy.

Why? Is there a reason everything bigger is rubber?

Will do. I have also considered approaching the Engineering department at Kennesaw State University to use their machines and expertise

Thank you. I in turn admire machines that don't require maintenance every .5 seconds, as it is with everything I hack together. From what I've seen of your builds, they are far and above my build quality. I can only hope to emulate once I've bought my own machines.

Nope. Mounted the whole assembly to the workbench and ground it flat and level using a granite slab and paper + wooden supports to make sure the slab was level when it slid around. Are you serious about piano wire? because it was a pain to straighten the pins then re-rivet the chain back...

The four fine pitch bolts allowed me to align the sprocket perpendicular to the axle/ slight concentric adjustment because they were on an angle. and the welded assembly concentrically mounted it. The links initially snapped because I used copper wire as a master link. Once I broke down and...

Theres literally a hole in the side of the cylinder covered by the heatsink fins.