Diamonite Electrathon America Racer

[Functional Artist]

Sorry I was late to the party. Body filler and a long board with 180 grit will straighten it out.

Hey Denny,

It was an experiment
...a learning exercise
...& I wasa just sayin'

F that!
...my arms would "hate me"
...also, just sayin'

& (& it's a big one)

I wouldn't have the opportunity to "try again"
...& try-n-make something...even kooler!

Let me introduce you to...Plan B

 

[Denny]

Plastic Bondo squeegees can also be your best friend after all the glass is laid and resined.

 

[Functional Artist]

Someone in the back says:
"It kinda looks like ya put that "embellishment" thing, on backwards

I says:
"Um...lemme check
...yesterday wasa long day"

 

[Denny]

It’s only backwards if you think it is.

 

[Functional Artist]

Man you always have me guessing.

Isn't that the down side? Inside? whatever your knees see?

Looks like the tape didnt like the resin.

Hey WTR,

The tape seemed to stick (& stay put) when "stuck" to the cardboard
...but, where the tape wasa overlapped
...is where the "issues" arose

Yup, your correct

The plan was ta make a FG "cavity" mold,
...off of that CAD "plug"
...so, the inside wasa smooth
&
Then, make the actual FG hood
...off of the FG "cavity" mold
...so/then, the outside would be the smoother side (like the rest of the monocoque)

I'ma learnin' more & more about what "works" (or how ta work) with this "stuff"
...& what doesn't

 

[Functional Artist]

Someone in the back says:
"It kinda looks like ya put that "embellishment" thing, on backwards

I says:
"Um...lemme check
...yesterday wasa long day"

Nope! I double checked...were...good

So, a "cavity" mold...like this...is what I wasa goin' for
...but, smooth inside (important detail)

I had ta tell myself "stop bein' so lazy & do it right"

So, I got me some 1/2 MDF
...after some measurin' markin' & cuttin' (basic hood mold pieces)
...& markin' for the hood embellishment (if we gonna do it...let's try-n-make 'er look kool)

I did some drillin' (1" holes) to establish the corner/curves, of the hood embellishment

Set up a "guide board" ta help the saw (& me) cut a straight line

Makin' sure the "adjustment" of the "guide board" wasa in the right place, for the "foot" of the saw

After cuttin' the "straights"
...I used a jigsaw to cut the shorter "runs" in the front

Jua-lla

Another view

A close-up view of a "corner/curve"

 

[Functional Artist]

Hood embellishments on real cars, "ramp up" from the surface of the hood to the top surface of the "feature"
...not, a hard "step-down" like this

So, we gots ta add some fillets

Ta make fillets, I've seen many materials used like:
....clay, wax, bondo, plaster, spray foam & I've even used Latex caulk
...but, I'ma just gonna "machine" them

Weapon of choice, for this procedure, would be a router (with a 45* angled bit)

Yup, seemed ta "do the job" quite...well

Doin' somethin a bit different
...on the back edge, of the "feature"

We'll see how it "turns out"

 

[Functional Artist]

Next, I added the dash panel to the "hood" mold
...& then, the (2) side panels

* Hi Ducky...I see you!

...& then, finally got to this "painted up" stage

 

[Functional Artist]

Sanded & smoothed

Got 'er all ready to coat with the PVA

Coated

This time I'ma just doin' a layer of CSM
...& then, lettin' 'er cure a bit
...before addin' more layers

Ta try-n-make sure I get in, all of these nooks-n-crannies really well

 

[Functional Artist]

A couple of hours later
...after the first layer wasa pretty well hardened up
...but, still good-n-tacky
...I added a couple of layers of the 1708 FG cloth

* I made sure to get a "good layer" on the dashboard "panel" ('cause it's the upper steering support)
...& on them "wrap arounds" corners too ('cause they help support the dash "panel")

 

[Functional Artist]

Ready for the reveal?

Workin' on poppin' 'er loose

Notice the color difference (gets lighter) as the "piece" releases?

Jua-lla

The hood embellishment seems to have "transferred" pretty well...too