Search results

Hey guys I recently had my father beat up on a wheel that he thought was steel. We were trying to get it off the kart but I forgot to mention it was Aluminum. Is this a fixable thing or do I need to buy a new wheel? I posted a youtube video and the wheel is shown at 6 minutes. He is the video...

Hey y’all so I’ve rebuilt my Carburetor after a year of sitting outside plugged with rags on the kart but I keep trying to run it but eventually after 5 minutes of idle the Carburetor keeps over flowing and spits and sputter and dies any thoughts? Or do I need to provide more info

Does any one have any tips for a restoration I've check the compression and made the big leap of buying the carburetor so in my book there is no going back

How much is this worth and what is it ?

Hey guys I've ran into a big problem in finding a way to mount my 40 series TC on my yerfdog spider box with a 16 hp lifan engine i've just been looking for some advice on ways to mount the TC. In lou of pictures here is a video to get all angles of the engine and swingarm...

hey guy i've recently got onto the forum and am really enjoying the atmosphere. you guys are really friendly and i have started a youtube channel for all my projects and stuff if you guys are interested yall should check them out https://www.youtube.com/channel/UCBx7hBUnwH-EQWwL2flzHBw

So I have 2 Spiderbox's or Spiderboxi (not sure what the plural is):lolgoku: but anyways I had a brake system that didn't work on one so I replace the master cylinder brake lines and banjo bolt and caliper and pads filled it up with Dot4 until the fluid was coming out of the bleeder hole on the...

Hey guys im new to the forum and i recently purchased a HH 250 SS for $400 sounds like a nice deal but when purchasing i realized it didn't have seats a muffler some dashboard electronics and a shift handle. i bought it anyways of course but ive been browsing for parts lately while fixing my...

Hey guys so I recently picked up this hammerhead 250ss for $400 and after I brought it home I discovered it needs a shifter and some seats an ignition an a engine stop button, a new master cylinder and some brake lines ... Only those parts bring me to a total of around $600 on...

Going 5 hours outta my way should I buy this is 400 dollars for this hammerhead 250 ss

If my bearing hangers are 17 inches apart how long should my axle be ?

Hey guys I'm back again and I need some help on measuring an axle my frame is 18 inches in length and I'm thinking of around 36-42 inch axle just wondering if anyone has input for my decision

So I recently got a go kart from my friend dead axle with band brakes and a centrifugal belt drive clutch I was wondering what I have and is it possible to mount a torque converter on this puppy

He guys back again So I recently ordered a part from buggy depot.com I ordered a belt for my spiderbox and after 4 days they haven't shipped the part and then had my bank account hacked and around 5,000 U.S. Dollars stolen and later I called their customer service and talked to a representative...

Well I was browsing the classifieds and found a yerfdog spiderbox for 150 dollar USA American and wondering if this was worth the time and money it has been sitting for about 7 years the guy said

Hey guys I'm looking into upgrading my front suspension because it's horrible but what I'm doing is I'm replace my spindles my a arms and my shock absorbers I have spindles and my shock absorbers picked out and the last thing I need to obtain are my a arms obviously and these come in two...

hey guys so i bought this kart on craigslist and it seems they replaced the engine from the stock gy6 to a predator 212cc and added a torque convertor after several hours or riding i realized that im burning the belt when i take off and anytime i go offroad i burn the belt till it eventually...

Hey guys I recently bought I brand new predator 212 cc but is there anyway I can bump up the 6.5 hp to 8 hp or more for around $100 dollars without removing the governor

I put a predator 212 on this kart and then bought a tav 2 replacement kit with and assembly mounting plate .. But which set up is preferable the assembly mounting plate or the original jackshaft set up ?

Ok so I looked everywhere and found that the 19 inch brake cable for yerf dog 3203 is pretty much unavailable and the only available brake cables are the 18 inch and 23 inch which one would be more suitable for the orginal brake drum and band? Or is there an alternate site I have not visited ...