Search results

Lights require a battery that you will pull off and charge or an engine with a charging system. I wouldn't pay more than 180 for that go kart. That's if the subaru will run off starter fluid.

I agree with flipping the pedals. It's a 445. I'm like 5'9 and have some room. My pedals are the other direction. Muddy :cornut:

My dad keeps buying ariens snowblowers. This is the 3rd of that size.

Could you put a jackshaft that routed it back and then a spricket off that jackshaft goes down to the axle.

Pretty sure it's a Manco 485.

I got a barn. There's also another mower with a plow as well as acouple snowblowers and some push mowers. Oh and another go kart. The stuff in front is mine. Tractors and all the stuff in the corner are my dad's. I have too much stuff and not enough time now. Edit: stuff in front of karts was...

I drive a 93 toyota quarter ton. Most of my karts I will pick the front up and set it on the tailgate then lift the back. The dingo is the only one I actually use ramps for. The tires add too much weight to the bacl end and the header is in the way. It's got the stock setup for tires and a gx160...

Bungie cords or straps. Strap it down.

Congrats on the win! Those bushings should make it seem like a whole new engine. Atleast tuning wise.

Nooooooooooooo

Maybe you need to change some settings. I can weld with both but perfer the 6013 because it isn't fast freeze like 6011.

Still the same thing. The engine can move seperate from the chain and break it or it will pop off often. Just hard mount it to the frame. Don't worry about the vibration.

Definitly overkill. But hey, for the wife, might as well

I like how the curent one is set up. Had a friend over and he brought his quad and I rode the dingo and tore up the yard, brake went out so I hopped on the 445 and ripped around on that.

Took me a minute to figure it out. I can feel your pain now. Probably a good thing I go off of the angle vs lettering.

With pipe frames one way to fix em is an insert that goes under the two pieces being welded, did it for a friend's kart after he broke the same piece off the front.

Suposed to be case two piece aluminum wheels. They're expencive now.

You cut off the front!!!!! My fav part lol. It saved my feet when my friend ran into me going 25 around my yard.

Alot of the lawnboys are two strokes. Shouldn't it make it easier? Even though impractical. I agree. It's great to use what you got lying around but at a certain point it isn't worth it.

Looks like someone already tried to beat on them... maybe try a puller of some sort but heat it good.