Search results

Got my tc in today, 1 inch 30 series to go on the briggs, need the sidecover off the other engine at the least or going to do a crank swap. The snowblower engine only has 3 bolt holes for mounting it.

Try having half a day of welding then school until 3, and 6 go karts. Fun. And to ShakenBake I agree, good deal, maybe see if there's a lawnmower repair place nearby that you could ask and see if they have any junk mowers you could get wheels off of for cheap, other sellers like BMI karts and...

I see pics but it's wayyyyyy to dark to see any detail.

If this clutch isn't too rusty, the shaft on the other pulley goes in the plate, will probably need new bearings. Someone else will have to grab it but there are belt sizing charts online, looks like a 30 series. (Comet torque averter) I'm guessing it's a 1 inch shaft because of the engine but...

Looks like it would have had a fiberglass body on it.

21×12

Nope.

As he said. We need pictures so we can see what's up.

Got a new tube put in. These tires look awesome

Fuel is off.

I'm sure someone else will say this but that throttle setup looks like an accident waiting to happen. How did you run the rod? And i'd sugjest getting a cable that has a housing. Not just a bare cable.

Yes. Black one. Has the airfilter/intake that I need. The muffler is toast. End piece falls off.

Not my i/c. Friend's. I would have gotten it but needed the other for the dingo. ---------- Post added at 01:36 PM ---------- Previous post was at 01:34 PM ---------- My dad did get a newer 5 horse off his friend for free. Sat, had a stuck valve, friend fixxed the valve but says it pops alot...

Got another Briggs. 8 horse. Tapered shaft. Going to probably swap the crank from my other briggs into it.

Got lug nuts for the wheel hubs. Then found out my dad had some stashed away. And also ran around town looking for wheel studs. Going to try the small engine repair place that my friend works at.

When you see one wheel roll past you you might think otherwise. It went a good 40 feet into tall weeds before it stopped.

Progress.

When you took the governer out you might habe tipped it before causing oil to get past the piston and out.

Green = go. Good luck!

They're on youtube. John and Isaac.