Search results

If I can't strighten out the spindle, does anyone know if this one will work? http://www.bmikarts.com/item/5-8-Spindle-Side-2-6986 This is the only wheel I can find that comes close to matching what do you guys think? http://www.bmikarts.com/item/4.10-3.50-5-Front-Tire-Rim-Assembly-6189 Or...

I didnt hit anything. I let my older and younger daughter take it out while I finished up on my daughters smaller kart. At some point, my older daughter decided it was a good idea to let my younger daughter (she's 8) drive. She decided to test the strength of the wheels against a concreat curb...

If you have a Tractor Supply Company in your area, check them out too, they have hubs just like the one r97 found. Not sure if you have a store like that in California tho. :)

Looking for the front wheels and right (passenger side) spindle for a Murray go kart model# GT60101x92D. The tire size for the front wheel is a 11X4X5. Here is a few pictures from today and why I need to replace the damaged parts. :furious2:

Was able to work on the kart today and got it all figured out. The throttle spring under the gas tank was to tight. Stretched it out a little and all is good. Took my daughter for a spinn on it and we both came back with brown teeth from all the power slides and 180's. We were laughing so hard...

I'd like to see how it performs. Post a few pictures when you get a chance to try it out.

I looked at the miller and it has some awesome features but not for an extra $300.00. I figure if I can’t read a chart and get pretty close to the correct setting then I have no point in welding to begin with. The one I’m really starting to like is the little Hobart Handler 140. It runs about...

I thought about the HF but considering I don't know how to work on a welder or modify one to work better, I thought it to be a better financial investment if I pick up a better quality welder. The last thing I want to do is spend the money on a machine (even as little as a couple of hundred...

Im going to set it up fir mig and the first thing I was going to replace was the helmet

Wanting to learn how to mig and thinking about getting the Lincoln 140 amp, looking for pros and cons or anything else I might need to consider. http://www.lowes.com/pd_256722-1703-...ncoln%2Bwelder

Toystore has explained the condition perfectly. As of now, it seem that the governor is not allowing the butterfly to competly return to idle. I can take the idle screw completely out and the idle will only drop to a certain (I'd say 1200rpm's or a little higher) rmp unles I physically close it...

And it's very possible that my throttle mount that I made is catching under the plastic carb plate not letting the engine return to idle. It might have been ok when the idle was set higher but not now. I'll pull the plate off this weekend and make sure I don't have an interference problem. If...

That is just awesome

Can't get much more simple then that. I'm loving this idea.

I figured it was normal for the throttle to change with the engine office, my b&s acts the same way. I'll do some more invstigating next weekend and if I can't find the issue, will pack it back up and take it back. Good to hear that this isn't a common problem with the clones.

So this is not a common behavor for the clone? If so, I'll take it back. Nit much needs to be changed as its pretty much stock but I will check the throttle first. It'll be next weekend, way to cold to work out in the garage this week

I ran it prior to hooking up the throttle but if you think it might just be an issue with the motor, I can return it as I took out the extended warranty. When I was searching, it seemed some had issues with the governor allowing the engine to idle down. Mine is at the point where adjusting the...

Yes, it seems that the governor is the culprit. Just the cheesy one that came with it but it doesn't show anything more then starting and changing the oil.

Expecaily in the winter

Because I really need to stop spending money on these karts or risk a wife not letting me back in the house.