Search results

Check out my post. I went to a local steel mill and for $7.00 they cut me a 3/4 straight piece. Then I drilled out 1/8 size holes for bolts with the same hub. Basically get rid of the stock rims and hack saw off the hub. Get rims from a tractor and bolt them on also. Make sure you buy auto bolts...

Thanks I played around with a lot of ideas until I got it right. In case you wonder the silencer cut about half the rumble down. Its a soda can base. I cut off the base as its thicker then drilled a few holes and it acts like a perfect additional chamber and just fit somehow perfect.

Thanks I forgot to add 10.00 for seat belt paint they were faded bad.

I didn't run the ratio but it has no problems moving up hills etc. Well It can probably use oil its been ran about 2 hours total probably by now. I will add the oil and try. I oiled it up nicely on reassembly and even tried the vid on you tube greasing the back plate. It did stop locking but...

Thanks- it was a bit of work revising that ceased clutch but had to try. clutch locks up a bit too soon and is spreading glitter if it gets too hot. I don't think its gonna last too much longer but it is working lol. This thing was heap when I got it.

To start I picked this cart up from a guy on CL for 60.00. Had a dead 6.5 Tecumseh power sport, broken live solid axle and guy delivered it to my house, no charge for mouse nest in engine. Took me almost 4 months to get it all done. Clutch was rotted rusted to the old engine shaft so bad I...

Might be able to use one of those throw away engines Tecumseh covers Like on the sport engines.

I have the Intek 6.5 on the Murray just finished same problems same repairs I tried. The best change was a new float. Mine idles nice on mid setting and chokes chugs on choke off but it does idle. I know it runs fine and the engine is super strong. I do find I really need to warm it up like an...

Hi friends- So I just wanted to post some updated pics and ask some questions? After a minor weld and designed solid shaft by myself its coming together. Today I ran the kill switch and ran the engine disappointed. As you can see I have the Intek briggs 6.5 engine. Got if from someone for 20.00...

Still working on the nitrox- Had to cut the hub off the old live axle rim as I could not break the rust off that rim, what a task. Anyway now I have a hub piece and rims which I guess I'm going to drill thru the 3/4 solid axle and use slip thru pins does anyone think the idea will fail? Will be...

On the brake- Yes the left side tube cracked on the top part in a slight angle. My thought is with the added steel on the bottom the support would solve the issue after the repair weld. I did notice the kart was missing a rear steel piece on the rear of frame so wonder if that could have...

So I stripped down the frame of the Murray. I have someone who is going to do a weld repair but the question is will it work. I have an idea. . In the pics I show you the crack which looks like a prior weld job. I compared this frame to the carter frame and I am wondering if where I marked...

Thanks that's a good vid for the repair but I have the solid axle which drives both rear wheels. Axle appears to have been welded right into each rim. I'm hoping DPC answers we both have the same odd rear axle design.

Actually mine has this long tube for a long straight solid axle I believe someone else had the post but I get what your saying thx, D ---------- Post added at 06:45 PM ---------- Previous post was at 06:42 PM ---------- This note was under DPC on the Murray cart he has the pics of the same...

can you share the axle part I have the same problem with mine? I was looking at BMI couldn't figure it out. thx

I sent you an email but in case you can help I have the same Kart I just picked up also with a broken axle. I'm not sure how to measure it correctly and had seen a similar one on BMI. If I can get your order number maybe I can just call them and get the right part. My axle broke off at the...

Here are a couple pics This could be a simple weld but note sure. thanks

Hello everyone Picked up a Go Kart to rebuild/restore. I really enjoy it as a hobby not sure what I got into with this one. Well to start the rear live axle is broken where it connects to the right rear wheel so I'm trying to find the cheapest or easiest way to fix it. Also the frame has a right...