Search results

How much does it weigh?

Anyone have luck with a remote kill switch on a gas engine gokart? Before I spend way to much time figuring it out I figured I would ask.:cheers2:

Wheels/tires are the same size although they are different types/brands of rims. Do the hubs need to be flush with the axle or can they hang over a bit? They seem solid enough. I wouldn't mind going as wide as possible if that means she will drift. :wai: I am hoping that moving the batteries...

I want to do this!! Hopefully it takes off and there are multiple races throughout California. :)

Spindles are fairly long and I have a lot of adjustment with spacers. Next question do I want to line up the outside or the inside of the tires? Left or right?

Exactly^^ I bought mine in the soft case for 19$ each onsale from HK. Story of my life! Started with a broke down razor dune buggy and now have a fleet of powerwheels, mx, and karts. All my toys together i have 22x sla batteries in use..

I bet if you went with a better controller like a kelly or Altraxx 100-150amp you could get more out of that little motor. This guy is running 2500w with 60v 5ah and getting 15minutes of run time. (I picked up my 4s 5ah 25C batteries from HK for 21$ each shipped.) Then spent way too much on a...

I appreciate the help and advise. I am also keeping an eye out and will hopefully pick up the correct kart for my needs before too long. Since I have no idea what I am doing I am going to start with the rear axle setup like this:

In an attempt to square up the kart I moved the rear axle so that it is about 3/4" longer on each side to the front spindles. And I have the rear hubs flush with the axle. Does this look correct?

Onsale at batterysharks. 23.50$ each Might be a better deal depending on shipping. https://www.batterysharks.com/Universal-Power-UB12180-D5745-p/ub12180_b12-18.htm But look into a better battery pack. Electric car bats or lipo etc.

Read this today and it gives me hope. https://karting.4cycle.com/showthread.php?787-How-good-can-make-an-oval-kart-handle-for-sprint-races

Let me start by saying this is my first kart ( I bought it "thrown together" so hopefully the correct parts are in the correct places? I am reading everything I can get my hands on as far as ackermann and camber adjustments etc. . However, after taking apart and adjusting every which possible...

Couple things: Check your front wheels and make sure they are straight (That can affect top speed) I would go with 4-6GA, it doesn't cost much more. Before upgrading batteries get a volt meter and see how much battery sag you have. For batteries 18-22ah are the same size. So go with 22ah if...

You sir are the man and thank you! https://www.ebay.com/itm/10T-size-35-3-8-9-53-mm-pitch-sprocket-f-ZY1020-MY1020-motor-f-Go-Kart-GoKart/162850691515?hash=item25eaa859bb:g:lKEAAOSwEVZaWnEN:rk:40:pf:0

^^That is awesome! Is it a gokart or a kit car?

15% off today only via the app. PICKFAST

TF8 is 8mm chain. If you want to go with something specific http://www.rebelgears.com/ will make you anything you want. Or maybe you can get a "better" quality of 8mm chain with higher tinsel strength.

That looks like a fun time! :cheers2: