Recent content by xxmiaja

i know the model of the cart will that help it is a streaker sc7 by ken bar

not a lot of off roading but i weigh 250 lbs. i have never jumped the cart or anything but one wheel wabbles, the axle is bent on that side been that way since i bought the cart

im trying to find out what is a very strong axle that i can buy that i do not have to worry about bending on me

if anyone can help me...i have been gone for a minute so my project had stopped now im back at it.i have a 420 predator engine that i took off the key ignition box that sits on the front of the engine. i want this engine to charge the battery.do i simply hook up the wire coming from the coil to...

Ok I never have lubed the torque converter because I was under the impression that the 40 series did not need Maintenence also where do I put lube on the 40 series torque converter

I am having a problem with my torque converter sticking.when I ride and let off the gas the converter stays halfway in gaged causing my engine to stall or after I brake and the cart stops it will keep trying to pull for a second will then hear a click and I see the inside if the driver plate pop...

My kart is a streaker dd9 high output it came with a 9 hp tech.i changed that with the 420.cc

My gokart is a streaker dd9.this was the high powered one with a 9 hp tech.engine funny thing is this engine had the same foot print of a 6 hp and the output shaft was a 3/4. I moved up to the 420cc.i really would like to beef it up to 20 hp but this means the life of the engine will suffer and...

Thanks for your reply..so this means I will have to change engine mount again to fit this engine yes the rpm is still at 3600.i am debating if it is even worth all the money I will spend to convert it..keep in mind the engine alone is 1,200

Do anybody have knowledge of the Briggs v - twin engine 20 hp engine on a gokart.i want to swap out my predator 420cc engine for this engine can my frame handle it how fast can it go what mods will I have to go through

Only progress is I just got the new engine mount with jackshaft with bearings I have to get a new driven with a 3/4 bore and sprocket and a new belt

Can anyone tell me a good strong live axle I can buy I see some for 20 bucks and some for 80 bucks what is a good strong axle to buy for a heavy gokart and a heavy rider

OK got it..I really appreciate your help I will start looks ng for something stronger now

Are you serious...that sprocket came on the go kart but the engine was a small 6.5 HP my engine now is a predator 420 cc 13 HP engine so I need a stronger hub?

so some how my key tryed to spin around in the keyway on my axle and broke the hub where the set screw goes in. i want to order a new sprocket but the ones i see do not have a center to it to tighten down on the axle.i also saw some axle hubs that bolt to the sprocket but they have no set screw...