Recent content by rpolanco

I'm having a real big problem with two engines I got for my go kart. The first one was a used Honda GX200 that wouldn't start without choke, and would die after 3 seconds of the choke on. It would also die if I turned the choke off. I swapped it for a BRAND NEW Predator 212 and it's doing the...

I thought that the choke is only used when the engine is cold

I just picked up a brand new predator 212 and it only starts when the choke is on. I switch it to run once its on and it runs good, but I feel like it should be able to start without the choke. Any ideas?

I checked my gas tank and there are little streaks of sand. I'm going to flush out the tank and fill it up with fresh gas. Anything else you would recommend doing?

I picked up an original GX200 and it ran good for a good half an hour. It recently started dying while riding and now it doesn't even start unless the choke is on. I start it with full choke but dies after about 10 seconds. I changed the air filter, carb, and sparkplug and I'm stumped. Ideas?

The ones in the link you posted would hold the cable, but have no way of mounting on the throttle linkage.

So I recently scored a 212 predator from a water pump at a yard sale for $50, and I plan on putting it on my Manco go kart. This engine doesn't have a throttle cable stop/holder and I can't find them anywhere that looks like this. Where can I find one?

Anyone know how to power a pair of LED lights 15w off of a Honda GX200 without the electric start?

So I recently picked up a Yerf Dog 3203 and I want to make it fun. It currently has 8" live axle wheels on 20x10.00-8 tires but I was wondering if I can just slap on some 6" live axle wheels with the same 1in axle hole to make it easier to find slicks. Everywhere I've been has slick tires for a...

I've looked into these before, the problem with these is that they are on a 3.75 (3 3/4) bolt circle pattern, and my hub and wheel are on a 3 3/8 bolt circle pattern

Where can I find some wheels identical to these? These are identical to the ones I broke into 5 pieces, and I haven't had any good luck finding them anywhere online that has them in stock. They came off of a Tyrod 4 go kart

The wheel cracked, not the tire

Anyone know where to get parts for a Tyrod 4 Go Kart? I need wheels because the old wheels cracked into 4 pieces, and the hub pattern is really weird. It's 3 holes on about 2 3/8 in pattern.

Does anyone know where I can get a pair of wheels that have a pattern of 3 lugs on 2 3/8in spacing? 3 lugs on 2.5in spacing may work as well.

I have a Honda GX200 and was wondering how to run two 12v lights with it. It's not a clone engine. I heard it's easier to do with the real engine and not a clone, but I just don't know where to start from.