Next, we need to drill the (4) bolt holes for the shocks, (2) in each mount
Since the tabs are ~1" x 1"
...that means that we need the holes ta be ~1/2" in from the edges
But, measurin' & markin' & then drillin' (4) identical holes (that's (4) seperate holes in (4) seperate faces) isn't easy
I got another trick for ya
Instead of measurin' & markin" & then, hopin" your eye got 'em all "close"
...just use a "guide" (a piece of "something" of appropriate thickness)
...& on a nice-n-flat surface
Scribe a line
...& then, turn the piece & repeat
Next, "pop the spot" with a spring loaded center punch
...then, drill your "pilot hole"
...then, easily drill 'em all out ta 5/16"
...& they should ALL be in matching spots
Lets see how that looks