Project: Briggs 3.5 (Don't eat while reading)

Status
Not open for further replies.

oscaryu1

New member
Messages
2,767
Reaction score
7














:ack2: :ack2: :ack2:
 

kibble

I banned myself
Messages
2,766
Reaction score
16
Nice Where do you guys get all these engines? and the money to do all this stuff?

Wait wait wait... and who's the one with the very expensive jr dragster engine?

I have to work to get the money to buy the stuff I want.:ack2:
 

oscaryu1

New member
Messages
2,767
Reaction score
7
eBay. Got it for $30. Money? I barely spent anything. Dremel and glaze breaker/honer...
 

jr dragster T

New member
Messages
3,966
Reaction score
8
Location
Cold place
Hey! I work too!...Just not as much as my parents do but I buy my own methanol, oil, parts, and more. I also paid for pretty much half of my go kart. Not including the tools. And I won alot of money racing so Thats where my money come's in. I won 1500 last year. And thats my first year when I was a rookie.
 

oscaryu1

New member
Messages
2,767
Reaction score
7
Hey! I work too!...Just not as much as my parents do but I buy my own methanol, oil, parts, and more. I also paid for pretty much half of my go kart. Not including the tools. And I won alot of money racing so Thats where my money come's in. I won 1500 last year. And thats my first year when I was a rookie.

Nice! Too bad my kart isn't exactly racing legal... neither is my engine... haha!

Wish there was a track near me :mad2:

Meh, who doesn't buy their own parts? :roflol: I spend hours in the autmotive section :sifone:
 

Jerryburger

Admiral Annoy
Messages
1,104
Reaction score
13
Location
The Nation's Catbox...er, AZ.
I'm a huge fan of those B/S 3.5's.... It's B/S's "Small Block" but I think it's like 9 cu in, which makes it a great motor for those with tight quarters. I've never had the pleasure of having my own to mess with, but a good friend has 2 of them, and they easily dust everything I had except for the BlueTerror motors. Have fun with it!
 

oscaryu1

New member
Messages
2,767
Reaction score
7
Thanks Jerry! I have a 5HP crank on the way. When that fits in, then hopefully I can hook up my Wiseco piston and billet rod setup. I'll try and get pictures tomorrow!

Explicit Error - Nope, I just used a hose and those gardening attachments. They work wonderfully. Mist, power wash (actually very powerful).

I didn't even scrub it. The only reason the bore looks so nice is because I honed her real good. Then I got out the dremel and a wire brush attachment and gave it a nice smooth surface (not pictured).

Now I have a exhaust header from the 5HP hooked up to it. Again, I'll try and post pictures tomorrow.
 

gocartkid

Bad Attitude
Messages
329
Reaction score
1
Location
CT
Hey! I work too!...Just not as much as my parents do but I buy my own methanol, oil, parts, and more. I also paid for pretty much half of my go kart. Not including the tools. And I won alot of money racing so Thats where my money come's in. I won 1500 last year. And thats my first year when I was a rookie.

Not bad for your first year! I actually fix other people's small engines to get enough cash to fix my own. I pretty much have a small engine shop going here! :cheers2:

Nice work Oscar! I have a question, though: I have an old B&S flathead 3hp, is it basicaly the same engine as yours? What are the advantages/diadvantages of hopping up a 3.5/3hp over a 5hp? :thumbsup:
 

oscaryu1

New member
Messages
2,767
Reaction score
7
Not bad for your first year! I actually fix other people's small engines to get enough cash to fix my own. I pretty much have a small engine shop going here! :cheers2:

Nice work Oscar! I have a question, though: I have an old B&S flathead 3hp, is it basicaly the same engine as yours? What are the advantages/diadvantages of hopping up a 3.5/3hp over a 5hp? :thumbsup:

Thanks! Actually, there are actually a few differences... (3HP over 5HP)

For one, the 3.5 can support 2 types of carburetors. The bore is a bit larger, and the head is a different size and shape. The flywheel is also a teeny bit lighter.

When I got my 3.5, I knew right away that porting would help power alot. Just looking in the exhaust and intake, you could see all the jagged and sharp edges. Ported it out, straight header, going to mill the head... ect...

Advantages: Some people say and have seen these 3.5's keep up with 5HPs and a few OHVs...

Disadvantes: May not have the same potential as the 5 horse. Not as easily found as the mass produced 5 horses.
 

oscaryu1

New member
Messages
2,767
Reaction score
7
*Pats dremel*

Got the used exhaust header from an eBay seller today. It's staged... quite alot. I'll try and get pics tomorrow.
 
Status
Not open for further replies.
Top