If you could make motorized type of vehicle you wanted...

[crazycart]

If you could make any motorized type of vehicle you wanted, What would you make? Engine? Suspension? What? Keep it related to go karts, minibikes, atv's, etc.

I would personally like to try to make a small kart or minibike out of Chromoly, And use a Duraforce engine, With the following upgrades:

Shaved head
Bored out
Carbon fiber reeds
Aggressive Porting (A 2 strokes major power boost)
Make a Stroker kit, 3-5mm stroke?
Have a custom Liquid cooled head made,also to fit Dual Sparkplugs(ensures fuel is burning completely)
Lightened Billet flywheel
30mm Mikuni Flatslide Carburetor
Custom Tig welded Expansion chamber, No silencer
Custom made manual transmission, used from old motorcycle parts

I'd also like to put a bigbore engine in a trike...

 

[oscaryu1]

"Off road" Go kart... you know those chinese models I'm talking about, but out of Chromoly, a hecka more reliable, Tyler's welding )), and a Clone with these mods:

11cc Shaved and ported head, "Golf ball" intake port, 28.5mm seat, milled
SS valves
32lbs valves
Hardened .276" Lift cam
1.3 billet rocker arms
Chromoly push rods
Lightened Honda Flat Top Piston
Gapless top ring, shrunken middle ring, stock oil rings
Lightened Wrist Pin
ARC Billet Crankshaft
ARC Billet flywheel w/ adjustable timing
12 degrees advanced key
24mm Mikuni tuned for alky
Uni Air filter
Billet rod w/ bearings
3 stage exhaust header

 

[jr dragster T]

Lol your wish's are my reality Oscar. Well atleast for my Rhino.

 

[oscaryu1]

Lol your wish's are my reality Oscar. Well atleast for my Rhino.

Get ons MSN Rub me more

(Don't take it THAT way )

 

[Kenny_McCormic]

Hayabusa race kart
4 wheel disc brakes(gotta stop 200mph in a hurry!)
I think that covers it.

 

[Russ2251]

I'd make one of these:

 

[newrider3]

Homemade ATC, low center of gravity
rotax sled engine, dual expansion chambers, FMF silencers
long *** swingarm, straight axle, hyd disc brakes
ring ding ding ding braaaaap

 

[modelengineer]

Edge Barracuda with turbo Hayabusa engine.

 

[Kenny_McCormic]

I'd make one of these:

Engine will try to spin bike, severely limiting ability.

 

[I like karts]

A frame like a rotax kart, except made entirely of carbon fiber, with a Sachs 303cc wankel snowmobile engine engine hooked up to a gearbox that shifts like a car (not sequential) And gear it so it car spin the wheels, but still hit 100mph

 

[crazycart]

Kenny, people do that a lot with bikes nowadays, without problems.

The sachs 303 is one of the weakest sled engines made.

 

[Kenny_McCormic]

But the sachs is a rotary!(if you cant see the sarcasm, its there. I hate rotary engines for the most part)

 

[crazycart]

Yes, and its a very weak one at that, deemed one of the most doggy and sluggish engines.

 

[I like karts]

ok, then put a rotax max 125 in place of that

 

[I like karts]

Yes, and its a very weak one at that, deemed one of the most doggy and sluggish engines.

A good port job and a new carb can fix that quick

 

[ed1380]

turbo wrx engine

 

[ryf]

my cart, with a 650 snowmobile engine (preferably with reverse)

next project, homemade scratch built frame and suspension geometry street legal car/buggy. powered by sb chevy... weighing in at less than 1800lbs. wet and driver

 

[tykenfitz]

I would build my own little army and every one would have a full suspension sandrail with engine from what ever cars we can steal








Oh! And a machin gun on the back!

 

[newrider3]

lol

Trust me, these are BAMF in person.

 

[jr dragster T]

LOL look it's a BIG Oddyssey.