engine won't start

Status
Not open for further replies.

ciref8

New member
Messages
36
Reaction score
0
OMFG!!!!! i disconnected the killswitch, put on the cover and no spark. SOMETHING IS UP WITH THAT COVER!!!!
 

Kaptain Krunch

Pro Junk Collector
Messages
4,636
Reaction score
4
Location
vermont
Check if its grounding out on the coil, it really shouldnt be this hard. Wrap any contact points on your coil in electrical tape AFTER Its bolted to the block.
 

ciref8

New member
Messages
36
Reaction score
0
is it possible that the magneto is put on backwards, when i turn it clockwise, there is no spark. If i turn it counterclockwise however, it sparks
 

ciref8

New member
Messages
36
Reaction score
0
hmm, the motor is suppose to turn clockwise, but would only spark if i turn it counterclockwise. when i turn it clockwise, i get no spark
 
Status
Not open for further replies.
Top