B DL(FreeRunners) 's official gokart build.

[FreeRunner15]

I'll race you to 42mph. First one with proof gets my Stickers

No fair. You have a beast camshaft & i'm running stock.

hmmmmm... i wonder how much of this extra fuel i will need to add 2-4,maybe 5, psi of boost seeing i am now able to control how much fuel i need now. Should be about the same, if not better, than a cam upgrade.
Just need to re-set the torque converter to shift later and then i'll be all set just as soon as i can keep my fuel tank pressurized.

 

[ezcome-ezgo]

I was about to post a snide comment. Frankly, this thread is mostly hot air and very little action. Put the rubber on the ground and lets see something.

 

[FreeRunner15]

I was about to post a snide comment. Frankly, this thread is mostly hot air and very little action. Put the rubber on the ground and lets see something.

come over here and record me. or send me a gopro and i will be more than happy to post many videos.

you must have missed the part when i started and ran it like 5 days ago. even move my riding lawnmower with the kart in the process.

---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------

unless you like blurry videos.
i have to move my camera sloww or the quality is real bad.

but for my laptop i can turn down the exposure but the brightness would be bad.

i think what you meant to kindly say was "" except with videos" .

 

[bob58o]

No fair. You have a beast camshaft & i'm running stock.

hmmmmm... i wonder how much of this extra fuel i will need to add 2-4,maybe 5, psi of boost seeing i am now able to control how much fuel i need now. Should be about the same, if not better, than a cam upgrade.
Just need to re-set the torque converter to shift later and then i'll be all set just as soon as i can keep my fuel tank pressurized.

I was just kidding. Since my engine won't start, I think it's a fair race. Lol!

 

[Poboy kartman]

come over here and record me. or send me a gopro and i will be more than happy to post many videos.

you must have missed the part when i started and ran it like 5 days ago. even move my riding lawnmower with the kart in the process.

---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------

unless you like blurry videos.
i have to move my camera sloww or the quality is real bad.

but for my laptop i can turn down the exposure but the brightness would be bad.

i think what you meant to kindly say was "" except with videos" .

If you had any friends in the real world....someone could film it for you....(or show you how to operate your phone) ....and then you could download to your computer and post up.

What comes around, goes around! !!!

I refer to your smartaleck post in the Marlboro thread!

 

[ezcome-ezgo]

I saw your kart move in that video a while back. The thing is I don't really give a hoot about videos, a photos of a completed project is worth a thousand words. And what we have here is a thousand words.

 

[FreeRunner15]

I saw your kart move in that video a while back. The thing is I don't really give a hoot about videos, a photos of a completed project is worth a thousand words. And what we have here is a thousand words.

well i like to build my engine too. and i like to tune it. maybe i like to ask questions too. i'm in the tuning stage right now and its coming along great, just needs work.

my kart was finished a long time ago when i got the engine and kart frame Now i'm learning and making it better. so i guess i should say i'm sorry for not having money like you to finish a project in 3 days?

i cant work for the guy i was working for cause he got laid off due to low gas prices so my project came to a near halt. i should be so far along my project by now it'd be a legal registered vehicle by now.

 

[ezcome-ezgo]

I have a great deal of interest and curiosity about karts, engine, wheels, etc. That's why I am an active member here. I would love to see some photos of your kart as it stands right now. You lengthened it right? How did that work out? Share the love and show us some good photos, it's (relatively) free.

 

[Poboy kartman]

my kart was finished a long time ago.

As long as you STAND next to it....because it doesn't have a seat! Talk to the hand....

---------- Post added at 11:56 AM ---------- Previous post was at 11:51 AM ----------

well i would like to be able to build my engine.
.

There....I fixed that for ya!

 

[FreeRunner15]

[QUOTEQuote:
Originally Posted by FreeRunner15 View Post
well i would like to be able to build my engine.
.
There....I fixed that for ya![/QUOTE]

Yes. Yes i would lol. i wont contest that one.

i'm going to stay off here for a little while. my webcamera just went out anyway. if i do anything interesting i'll try and capture it with my bad-quality cell phone.

 

[ezcome-ezgo]

Bub-bye

 

[Poboy kartman]

Uh huh...." I can't post videos right now because my mommy is watching! "

 

[Poboy kartman]

Just watching this show called.' Walker, Texas Ranger' and it had some interesting lyrics:

In the eyes of a Ranger, the unsuspecting stranger, had better know the truth of wrong from right.

'cause the eyes of a Ranger are upon you....any wrong you do he's gonna see...when you're in Texas look behind you....'cause that's where FreeRunner's gonna be!!!!

("Way behind! !!! Y'all come back now, hear?")

 

[FreeRunner15]

Still needs either a 40 tooth driven sprocket or 2 wheel drive for more traction.
i
'll drop this off here:
https://www.youtube.com/watch?v=TyTYDHxL1l4&feature=youtu.be

 

[ezcome-ezgo]

Fascinating. No throttle control except whats on the motor, no brakes, no seat, no axle (!). Did you just weld bolts or studs on the frame for the rear wheels?

 

[Poboy kartman]

Fascinating. No throttle control except whats on the motor, no brakes, no seat, no axle (!). Did you just weld bolts or studs on the frame for the rear wheels?

He can't weld....

 

[ezcome-ezgo]

Zip ties?

 

[Poboy kartman]

With every post....you not only verify your propensity to lie....but the fact you're an idiot...(who delusionally thinks he's a genius) ...

---------- Post added at 09:00 AM ---------- Previous post was at 08:58 AM ----------



This....

Still needs either a 40 tooth driven sprocket or 2 wheel drive for more traction.
i
'll drop this off here:
https://www.youtube.com/watch?v=TyTYDHxL1l4&feature=youtu.be

Did you REALLY think no one would notice the front wheel change? Quit playing games....you're not very good at it....

---------- Post added at 04:25 PM ---------- Previous post was at 04:22 PM ----------

https://www.youtube.com/watch?v=IwC_6DI8tS0

I meant to quote this^!

 

[FreeRunner15]

thats the kind of weld i got for free. i didnt like it either.

and what do you mean front wheel change?

i cant satisfy you guys for nuthin.

---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------

LOL if you thought i went into reverse and that is my front wheel at the end of the video.. nu uh. i turned around.

 

[Poboy kartman]

thats the kind of weld i got for free. i didnt like it either.

and what do you mean front wheel change?

i cant satisfy you guys for nuthin.

---------- Post added at 04:29 PM ---------- Previous post was at 04:27 PM ----------

LOL if you thought i went into reverse and that is my front wheel at the end of the video.. nu uh. i turned around.

Nope..I'm not an idiot...(that's your job)....it's not the same wheels you posted a while. back....and SHEESH! Even when YOU build it, I can tell the front of a kart from the back!