• OFF TOPIC fun forum - NO politics - NO religion - NO jerks. It's not complicated. Thanks!

1978 f150 flareside project

Status
Not open for further replies.

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
I can see pushing a trailer if u ain't very good at reversing

But launching a boat sounds very risky

I would have thought mostly winching, towing and or racks

Can't say I've ever seen one though
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
Guys that shove trailers around a lot have been know to do a front hitch. Probably saves a lot of strain on the neck!

I'm not sure I'd want to launch a boat by dunking my engine!
 

B.M.800

TheBeal.
Messages
2,387
Reaction score
26
Location
Central PA
I sold a guy a mini and he had a hitch on the front of his Jeep, may dad was gonna ask him bout it but forgot. Kinda just figured it was to push trailers.
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
I'd run (and do) 10w-30 anyway. Add in a bottle of zinc additive, too, although your cam's probably past the point of exponential wear if the PO wasn't using any.

Uuummm, D? While you are (entirely) correct about the back story of zinc being phased out in motor oil for the environmental factors [in this case, killing cat. converters]; it's absence, just like lead in gasoline, had to be dealt with.

While the saga of dealing with reduced amounts of lead in gas is still problematic for high performance vehicles (every OEM had to learn a great deal about metallurgy to deal with that one), the field of automotive lubricants has had the opposite problem.

To wit; Kevin Cameron, an editor for Cycle World magazine, wrote an article over 10 years ago about people who were so fanatical about getting their hands on a period perfect example of their favorite late '60's early '70's motorcycle, that they were building them from (!!!!??????!!!!) nothing but NEW,OLD-STOCK PARTS!!!!!

The problem the found themselves up against, is that when they first fired up their dream ride, they smoked and used oil like they were designed by OPEC.

Well, as you might have imagined, if you can build a period perfect motorcycle using nothing but extremely rare, :censored: priced parts, you get a little :censored: if it doesn't run right.

What the OP's who spent the BIG MONEY to find out was that modern lubricants are so good that an engine assembled from all the correct factory parts is incapable of "Breaking In" using modern lubricants.

Take such an engine, fill it with the cheapest brand of motor oil that meets current standards for motor oil, and you will find what they did.

Even today, with the best standards of production, the OEM's all around the world still require a break-in period for all the vehicles they build; mostly for the engine. If the sales person claims you don't need to worry about proper break in, go find your car somewhere else (like somewhere they Honor warranties).

What they found, was that modern lubricants were so advanced and capable that the "NOS" parts couldn't achieve the required (and factory designed) partial "interference" fit needed to "break" them in. Today's lubricants are so effective that the factory perfect parts from that age couldn't make contact and start the break in process.

All Blue needs to do is keep changing his oil; keeping an eye on the dip stick (color and clarity) as well as a little common seance should keep him going.

Like I said D, I apologize.....:surrender:

Pat
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
Uuummm, D? While you are (entirely) correct about the back story of zinc being phased out in motor oil for the environmental factors [in this case, killing cat. converters]; it's absence, just like lead in gasoline, had to be dealt with.

Like I said D, I apologize.....:surrender:

Pat

No, no. It was based on hearsay, which as we all know, can be absolute BS. :surrender:
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Did a previous owner do a SAS? I was pretty sure that even in 1978, they were using TTB.. No?

(I'm not really a Ford guy, so I'm unsure)

the last year of the straight axle on the f150's was 1979. as far as i know, they are still putting straight axles in the new f350's.

Uuummm, D? While you are (entirely) correct about the back story of zinc being phased out in motor oil for the environmental factors [in this case, killing cat. converters]; it's absence, just like lead in gasoline, had to be dealt with.

While the saga of dealing with reduced amounts of lead in gas is still problematic for high performance vehicles (every OEM had to learn a great deal about metallurgy to deal with that one), the field of automotive lubricants has had the opposite problem.

To wit; Kevin Cameron, an editor for Cycle World magazine, wrote an article over 10 years ago about people who were so fanatical about getting their hands on a period perfect example of their favorite late '60's early '70's motorcycle, that they were building them from (!!!!??????!!!!) nothing but NEW,OLD-STOCK PARTS!!!!!

The problem the found themselves up against, is that when they first fired up their dream ride, they smoked and used oil like they were designed by OPEC.

Well, as you might have imagined, if you can build a period perfect motorcycle using nothing but extremely rare, :censored: priced parts, you get a little :censored: if it doesn't run right.

What the OP's who spent the BIG MONEY to find out was that modern lubricants are so good that an engine assembled from all the correct factory parts is incapable of "Breaking In" using modern lubricants.

Take such an engine, fill it with the cheapest brand of motor oil that meets current standards for motor oil, and you will find what they did.

Even today, with the best standards of production, the OEM's all around the world still require a break-in period for all the vehicles they build; mostly for the engine. If the sales person claims you don't need to worry about proper break in, go find your car somewhere else (like somewhere they Honor warranties).

What they found, was that modern lubricants were so advanced and capable that the "NOS" parts couldn't achieve the required (and factory designed) partial "interference" fit needed to "break" them in. Today's lubricants are so effective that the factory perfect parts from that age couldn't make contact and start the break in process.

All Blue needs to do is keep changing his oil; keeping an eye on the dip stick (color and clarity) as well as a little common seance should keep him going.

Like I said D, I apologize.....:surrender:

Pat

long post! thanks for the info.so zinc is just to break it in? think im past that point by over 30 years :lolgoku:
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
who launches a boat going for ward? not to sound rude.

Nearly every single person I know. It is much easier to do it that way actually. You have added visibility and more manoeuvrability.
 

Attachments

  • 233512_lg.jpg
    233512_lg.jpg
    29.6 KB · Views: 9
  • watling-img-405pxl-boat-tlr-02.jpg
    watling-img-405pxl-boat-tlr-02.jpg
    19.9 KB · Views: 7
  • watling-img-405pxl-boat-tlr-03.jpg
    watling-img-405pxl-boat-tlr-03.jpg
    15.9 KB · Views: 6
  • watling-img-405pxl-boat-tlr-05.jpg
    watling-img-405pxl-boat-tlr-05.jpg
    22.9 KB · Views: 8

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i let my truck idle for 5 mins yesterday, backed it up and noticed a softball sized spot of oil on the snow. its coming from the rear main seal :( im pretty sure it wasnt leaking when i bought it..

looks like im going to have to pull the engine. might as well do the main bearings while i have it out.
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
i let my truck idle for 5 mins yesterday, backed it up and noticed a softball sized spot of oil on the snow. its coming from the rear main seal :( im pretty sure it wasnt leaking when i bought it..

looks like im going to have to pull the engine. might as well do the main bearings while i have it out.

Get a plastigauge and check the bearing clearance first.

Are you sure it's the rear main seal? The oil pressure sender leaking looks alot like a rear main seal leak.
 

crazzywolfie

New member
Messages
293
Reaction score
1
Location
Orangeville, Ontario
Nearly every single person I know. It is much easier to do it that way actually. You have added visibility and more manoeuvrability.
i have never seen someone launch a boat driving forward. i know drivers are getting dumber but most people who have a boat are usually capable of backing a boat into the water. i would rather keep my engine as far away from the water as possible. i would hate to spend $3000+ on a new engine because you got too close to the water to launch a boat.

now i could see something like that coming in handy if you had to move boats or trailers all day long.
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
whats the oil pressure sender look like? i am not sure that it is the rear main seal. just all around the oil pan and in between the transmission is soaked in oil
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
whats the oil pressure sender look like? i am not sure that it is the rear main seal. just all around the oil pan and in between the transmission is soaked in oil

 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
i never found an oil pressure sender. i did find a squished off tube coming out of the oil pan..

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zps0a96dc6d.jpg

that melted goop is a duct tape dirt cover.... how it is staying on there i do not know

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zpsaa355f73.jpg

noticed my p/s pump bracket is cracked and the belt is slightly off alignment. looks like someone put nuts as spacers between the bracket and engine block? hmm...

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zpsf69a4254.jpg

all my parts came in today!

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zps5c2aec30.jpg

a 35 bucks well spent

http://i924.photobucket.com/albums/ad86/bluethunder3320/photo_zps0f83c9df.jpg
 

Attachments

  • photo_zps0a96dc6d.jpg
    photo_zps0a96dc6d.jpg
    111.1 KB · Views: 1
  • photo_zpsf69a4254.jpg
    photo_zpsf69a4254.jpg
    47.7 KB · Views: 1
  • photo_zps5c2aec30.jpg
    photo_zps5c2aec30.jpg
    90.4 KB · Views: 1
  • photo_zps0f83c9df.jpg
    photo_zps0f83c9df.jpg
    99.9 KB · Views: 1
  • photo_zpsaa355f73.jpg
    photo_zpsaa355f73.jpg
    83.3 KB · Views: 1
Last edited by a moderator:

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA

Attachments

  • P1040149-Copy_zps23f692c9.jpg
    P1040149-Copy_zps23f692c9.jpg
    122.6 KB · Views: 1
Last edited by a moderator:

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
i have never seen someone launch a boat driving forward. i know drivers are getting dumber but most people who have a boat are usually capable of backing a boat into the water. i would rather keep my engine as far away from the water as possible. i would hate to spend $3000+ on a new engine because you got too close to the water to launch a boat.

now i could see something like that coming in handy if you had to move boats or trailers all day long.

Depending on the ramp angle, and the height and wheelbase of your vehicle, this has to potential to go very badly. I simply would not be doing this.

Now- moving trailers around a yard from a front hitch- certainly!

Anybody that cannot launch a boat in reverse needs to surrender his man card immediately...
 
Status
Not open for further replies.
Top