196 cc engine mods

Status
Not open for further replies.

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Nope. I am not a Doctor, But you are far from that.
'I did stay at a holiday inn once! So I'd say more Hypochondria!
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
That's a relief, but c'mon man you couldn't get your PhD?
All you had to do was spring a little extra$ for the Holiday Inn express™©and you could've been a D.r. !
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Got this honda motor for parts and it works.
Was thinking I might use the piston and or wristpin for my motor... thoughts on compatibility???
It is a 163cm3
 

Attachments

  • IMG_20160625_092558.jpg
    IMG_20160625_092558.jpg
    311.2 KB · Views: 5
  • IMG_20160625_092204.jpg
    IMG_20160625_092204.jpg
    205.6 KB · Views: 3

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I'm confused.

Why doesn't a rod designed for a 196cc engine fit the piston in a 196cc engine?

The description of the rod...

"ARC stock length billet rod with bearing inserts for the GX200 & GX160 or the BSP196cc(Clone)
3.303" center-to-center. For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. Uses ARC's custom manufactured bearing inserts and ARP rod bolts manufactured specifically for ARC. ARC has the only forced oiling scoop dipper rods available for these engines providing superior lubrication at the bearing journal."

---------- Post added at 10:26 AM ---------- Previous post was at 10:11 AM ----------

gx160 is 68mm by 45mm
gx200 is 68mm by 54mm

I'm not sure what piston you have or need???
Stock Piston for Honda GX160 & GX200 / 5.5-6.5HP Clone Engine
http://www.bmikarts.com/Stock-Piston-for-Honda-GX160-GX200-55-65HP-Clone-Engine_p_133.html


or
Standard Stock Piston for Clone OHV Engine
http://www.bmikarts.com/Standard-Stock-Piston-for-Clone-OHV-Engine_p_55.html????????

---------- Post added at 10:33 AM ---------- Previous post was at 10:26 AM ----------

Arrrrgggghhh:censored: :censored: :censored:
Well at least there's that emoji !
More parts , more tools , and almost worst of all no time for ridin , worst of all would be the more money I don't have part . ( maybe I should stick up the armored truck that delivers the "po' boy fund" ) :2guns::2guns:

Honing tool is a free rental from AutoStore.

---------- Post added at 10:36 AM ---------- Previous post was at 10:33 AM ----------

Are you telling me there is NO ROD to fit that crank, block, piston??????

---------- Post added at 10:39 AM ---------- Previous post was at 10:36 AM ----------

:mad2:Oh boy my finance department wasn't counting on that .
Back to real work I guess. ( kinda gotta admit it sounds good in theory )

Is G.A.B. Contagious ???????????

GAB Nation!
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
m confused.

Why doesn't a rod designed for a 196cc engine fit the piston in a 196cc engine?

The description of the rod...

"ARC stock length billet rod with bearing inserts for the GX200 & GX160 or the BSP196cc(Clone)
3.303" center-to-center. For use with the stock crankshaft and stock style (dished or flat top) piston in modified engines. Uses ARC's custom manufactured bearing inserts and ARP rod bolts manufactured specifically for ARC. ARC has the only forced oiling scoop dipper rods available for these engines providing superior lubrication at the bearing journal."
The rod isn't the problem ....wristpin....won't go through con rod ; so I'm hoping this piston and Wristpin will work.
I think the fact that it's a 7 hp motor may be the issue.....some parts are just slightly smaller than my stock ones ,always by just a miniscule amount
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
My extra motor is a gx 160 so I'm most likely going to throw all my parts at that motor instead and put the duromax back to stock
Kinda sucks to start 1.5 hp down but at least I have most ( need piston rings )of the parts I need already.
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Motor running after complete teardown and stage 1 upgrades from NR Racing . He will be driving by this weekend with new videos.
8° Timing key , 18 lb springs , jet , air filter , header , [ fuel pump , and fuel filter ( not part of stage 1 upgrades)].
I know about the connecting rod and the possibility of blowing up the motor but a racer buddy of mine swears that they've run this set-up with no issues . I'll let you guys know if and when I have issues and post pics if necessary.
He gave me the 160 I'm building now so if he's I mean we's wrong I won't s feel bad
https://youtu.be/UnfnXk0wljY
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Very interested to see Tbh , I don't plan on babying it so should be a good experience either way I learn something and if it goes badly ; all the more reason to get a powerland for the Murray.
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Very interested to see Tbh , I don't plan on babying it so should be a good experience either way I learn something and if it goes badly ; all the more reason to get a powerland for the Murray.

Had some more time to think about this and I think I'm going to go back with the stock Springs No sense grenading a perfectly good motor.

Still curious tho. :oops:
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Was riding my kart for first time yesterday and first 2 things I noticed is lack of overall power and oil coming from exhaust and valve cover vent tube; what did i do wrong?
( I think maybe piston rings aligned improperly)
Unrelated ( I think ) I removed fuel pump and elevated fuel tank and eliminated a lot of my fuel related issues.
Any thoughts guys ?
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Well it could be a number of difficult things to diagnose.

Without knowing what you did right, hard to say what you did wrong.

Did you replace all the gaskets after cleaning off the old gasket material?
Did you properly align the cam with the crank if you had the side cover off?
Did you set the valve lash properly?
Are the valves lapped in and sealed properly?
Did you install the timing key correctly?
Is the ignition ground secured?
Is the spark plug good?
Did you keep the piston ring openings away from each other?
Did you torque everything to spec?
Did you tighten the oil dipsticks?
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
Yes to everything with possibility of rings becoming close to inline (2 possible but all 3 I'm sure didn't happen).
I haven't read the plug yet ( will do shortly ) so is possibility my carb is too big atm I'm using the .650 carb . I did that in an effort ( I thought) to help with crappy carburetor , turns out was fuel pump giving me issues whole time, not pump itself but issues related to having fuel pump ( only thing I didn't try was a different size needle seat ).
 

leesiel

Yardcart 196
Messages
223
Reaction score
1
Location
Savannah G.A.
I'm at a loss fellas she's getting air fuel and Spark and she still won't start even with starter fluid.
Ran her for a while and she ran just fine :swap carburetors from one to the other and back again and nothing since.
Ran with both carburetor s, on the last change to the 650 carb she ran for 5 min then kind of sputtered out and would not start .
Any thoughts?
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
I don't know. Mine won't start or run if the fuel is under an 1/8 tank?

Is the tank vented?
Try with the cap off?

Sorry, I know how much it sucks when your engine won't run.
 
Status
Not open for further replies.
Top