Search results

My buddy and I just built a couple of Manco Dingos with 212 predators and Chinese knock off versions of the Comet 30/TAV2 torque converters. Needles to say the belts were junk. One lasted for a couple weeks and one shredded in about 10 minutes. From what I've read, the general consensus seems...

Acquired an all original Manco Dingo 288 (I think) last week that still has the Briggs 8hp flattie, Comet 40 series and jackshaft system still on it. Main thing I'm missing is the belt. Anyone know what length the original belt would've been? Amazon and eBay have several 40 series belts, but...

Actually you can do a simple governor "mod" by moving the spring and adjusting the throttle stop and it'll ride right around 5000 with everything still hooked up. Look it up on YouTube. Takes 5 minutes. We've done it....and put a tach on it. It's legit!

So the factory valve springs are good to 5000 rpm? I just don't see why it's necessary to keep the factory ones IF I still have the governor limiting me to 5000 RPM anyway. When we changed the springs in the other Hemi we have, it seemed "crisper" in the top end and was still governed to...

I don't have a rod yet.....I am not planning on removing the governor YET though. I'm going to do a rod, cam and gov removal all at once. At that time I'll change the flywheel too. So it shouldn't turn more than 5000'ish RPM. I got the valve springs because they were cheap to add to the kit...

For Father's Day, I got a new predator 212 with the Hemi head. Tomorrow we have safety training at work, then we just have to sit around, so I'm taking it with me to work on after we are done. I ordered a basic update kit from NR Racing....header, jet, air filter, low drag fan and a few other...

I have that exact same engine. I think they were made to run stationary equipment because it has high and low idle (at least mine does) and it's the first 5hp I had seen with a 1" shaft....ironically you've got one too. I bought a knockoff Comet 30 series TQ from eBay. Just make sure it accepts...

Can you point me to a good video, or elaborate a little more? Thanks.

Is that their only downfall? Are they just as strong? Ironically I almost clicked the button for a 45" earlier, but figured I'd better look up some info. I've got mixed feelings about BMI, but go powersports wouldn't price match, or even try to on anything I asked them about.

You would think that, but all the racers in basically every sport use them, sooo......

I'm thinking about building an EVAC setup for my Hemi-predator, instead of just using a breather that does nothing. Anyone have any experience with this on a Kart? We always ran them on our V8 race engines and I would assume the same theory applies here, but I never see them on any Karts, even...

Just put the same setup on an old Manco Dingo with 18" knobby tires and 48 tooth sprocket.....pulls really hard. I'm about 210lbs and I can put my son who is about 30 pounds, on my lap and it hauls us up any hill no problem. Slings rooster tails like no bodies business. Engine has a stage 1 kit...

No, didn't get a clutch unfortunately. Motor wasn't even bolted on. Kid said he had just bought it. We just built another Dingo, that's not quite finished and this one is actually in better shape.

I don't even see a crank seal, just looks like one really beefy bearing.

My friend and I have been getting together and working on Karts 1-2 times a week lately and we've been buying up local Karts to wither fox and keep or resale as we see fit. Today he picked up and old Manco dingo and the kid had a 5hp Briggs for it. After he gets it, he brought it over to my...

Did you mod that carb any? I can't find any info on the fixed jet carbs. What happened with the faux tilotson?

I'm pretty interested in this thread myself.....wanting tho throw together a flattie for my vintage Manco.

Here's some more pics, now that the seat is off. There are still some Minor differences I see, but could be different years. Here's how both controls are set up. This is the throttle side and what's left of the cable, the brake side is mirror image, but cable is gone. On this frame, the...

http://www.oldminibikes.com/forum/go-karts/62562-vintage-racing-karts-28.html HMMMM......orange crate has the same spindles AND has the weird tank mount!

OK, finally after digging around and accidentally stumbling upon some pictures, I believe the one WAS possibly a Manco American Express. The spindles and everything look the same. Has the same 4" wide seat mount, pedals mount in the same spot and most of the pictures had the same style pedals as...