Search results

Dolmar PS-7900 Each at 70cc and 6.3 hp That means with 24 of them they have... 115.2 cubic inches 1.888 liters 1680cc 151.2hp That is more than my ford ranger. But my ranger is a little easier to start.

No keep the stock bars, and keep it like that.

If you want a chance at actually completing the project, you will be using a rigid rear suspension. This is where there is no shock or spring in the back, thus it is rigid. You will need a rear axel to see how wide to make your frame. Once you have that, then you can start welding. I am...

If that engine is off a trike, then it should fetch you about 15-20 hp. If is has a kick start and gears, then i would reccomend makeing a real bike out of it. You could even get it lisenced and ride it around town.

So if i have 8,000 rpm on the engine, and i put a 10 tooth on the engie. Then i put a 20 tooth on the jackshaft, and have the clutch on the other side of the jackshaft, i should be ok. What about gearing for the rear wheel? Would i then use regurlar gokart gearing. Like a 13 on the clutch, and...

So a 10 tooth on the Engine, 20 tooth on the jackshaft, then a clutch with a 10 tooth on it, and a sprocket with a 40 tooth on the axel? Will that get me correct gearing ratios? Could you also explain the gearing concept? Like how to calculate what sprocket is needed in what place. Just so that...

Im trying to do this as least costly as possible. Any ideas on the gearing for this thing? at 8,000 rpm?

where did you buy that exaust, and how did you know it was tuned and right for your motor? Any one know how to make tuned exaustes for twostrokes?

Sorry about not putting much info and ideas in my post last time. Here is what it should have said... I am debating weather to put the clutch on the motor. (make a clutch housing and put a sprocket on it to make it work.) like this Or make a sprocket fit the engine, and then put the...

Should i do the set up like this or this?

The Frame

I dont know. If you cheap like me, you can try using what you get for free, or what you already have. Or if you dont want to spend much, you can go to a small engine shop and get an edger or a tiller ( i think that tillers have more power, but im not sure) for a reasonable price. These can...

Nice Tig Welds

I welded the basic frame yesterday pictures later, maybe, need to up load them.

You can get Honda Odyssey's for about 500-1000 depending on condition and how nice the seller is. Many of the parts on it are good, and you could do some modifying and make it exponentially better.

The metal for the frame was delivered a a coupl days ago. I am going to bend out the frame tomorro. Will post pics soon!

if you hit too hart though you will completly bottom out. you may also get rocks stuck in there and not beable to fully retract to operating position. simple and easy idea though.

determining factors how nice looking you want it how big you want it how fast how technical how reliable how powerful how the heck are you going to do this how much time you have how much money you have

sounds neat!

Over the past week i have done some aluminum welding, its pretty tough. Im getting better though!