Search results

I just bought a go kart with the back wheel mounts cut off I bought the live axle off the guy for 60 dollars how I install it? Also how would Install brakes and sprocket I'm new to this type of go cart well most go karts :x

I ended up buying it for 220 no engine

1990 phoniex for 270

You know the black screw that u can screw in and out to adjust idle, under that is a black plug on the new carb I bought it has some gold thing installed and on my old one it didn't. so I swapped them out and it stayed running. You could probably remove the gold part and it would work I didn't...

Thanks for the diagram and help go kart is up and running now on first pull :) Sent from my SM-N910P using Tapatalk

So I replaces the low idle from my old one into the new one. The new one has a gold thing on the bottom the old one didn't what is that? I'm guessing that's what is stopping it from working right

I have a bigger jet installed currently. I still have my original carb anything I can use from there to fix this problem? Sent from my SM-N910P using Tapatalk

Gas pretty new the spark plug is fairly new maybe 2 months old I currently have a pulse pump set up I see the gas flowing. After adjusting the screw sometimes it will run a little longer but it still cuts off

Are you talking about the goldish one? I just tried playing with it and no luck it still just cuts off. I will get on my location thanks for the heads up

I got my gx200 engine back running it has a new carb and new gasket. Everytime I turn it on I need to open the throttle all the way and when I let it go it cuts off I already tried adjusting the screw for throttle but the wheels spin at full speed. Thanks in advance Cesar:2guns:

Hello all so when I bought upgrades for my gx200 I received an offset flywheel key (8 degree) is this just as simple as installing it and that's it or will you have to mess around with stuff after its Installed? Thanks in advance Cesar:2guns:

Thanks joe I'll try it. I finally got the bolt out. Also it doesn't look like the coil really touches the flywheel I have moved my pulse hole for the fuel pump to where the oil sensor used to be is that ok?

Ok so I had most of the bolt you there was just a lil then layer in it so I put a harborfreight sound file in it to try and get it out and it broke in there so not that's stuck I tried drilling it out it didn't work so I drilled a lil to the side where the old bolt pieces are and it looks like...

I decided to just go with. 6.5hp from harborfreight Idk it just stopped working I thought maybe water got into the gas so I replaced the gas and drained the carbs it Still didn't work so then I opened it up to check what the inside was like I ended up breaking one bolt so it's stuck in there I...

So my honda gx200 6.5hp engine died on me it had governor removed upgraded springs upgraded airfilter and upgraded exhaust I'm thinking about buying a 13hp engine from harborfreight. I have a racing style go kart will it be to big for it? Will it be faster still if I leave it stock? Will I need...

Thank you all for the help I'll be sure to install a new spot for my pulse

Can I make my gas cap ventilated or do you have to buy one?

Yeah that worked thanks! When I took the gas cap off it went down then I put the gas cap back on gave it a few pulls and it went up thanks a lot :)

I recently put a pulse pump on my gx200 engine at first it worked well with a few pulls the gasoline would get sucked up and would work fine but now it doesn't the fuel up I can see the fuel sitting in the line about 5 inches from reaching the pump but it never moves up it just gets pushed down...

Does it matter if the back rims are wider? What are good slick sizes to put on it?