Search results

Thanks everyone likes very much like coyote I'll keep looking at more

Oh I have :) it has an engine an everything I just took everything off to clean it. Decently modded

:roflol::2guns:

I'll check when I get home I don't see markings the previous owner had given it a nice thick coat of paint

What are the main brands for go karts like most commonly found

Thank you

Ok thanks for all the help. It turns on and runs so I'm happy with that just gotta work on putting a new throttle cable on now the one on it almost got me ran over...the throttle was stuff on open is wasn't open to much but it took off like crazy I'm glad It didn't hit anything. I can't wait to...

Thanks cartman it is working now but the rocoil pull start always yanks back hard and Flys out of my hand. Any ideas what could be the cause?

Nope no buddy. Thanks for the info I called it quits for today my head hurts lol. Will give it a go in the morning. And just so I don't do it wrong..which is intake and which is exhaust :p

That is the connect rod I used

Yep I set them at tdc but Its wierd. I set it .003 and they are good and I rotate it to tdc again and they are tight to the springs..then I rotate to tdc again and they are at .003 I rotate again and they are tight and so on. ---------- Post added at 10:09 PM ---------- Previous post was at...

The valves are set at .003 the cam is lined up so both dots are matching. ---------- Post added at 07:35 PM ---------- Previous post was at 07:13 PM ---------- What would you recommend for valve clearance on my set up? ---------- Post added at 08:28 PM ---------- Previous post was at 07:35...

Hey everyone I just recently upgraded my predator with a new 14cc head, billet con rod and billet flywheel. It turned on the first time I turn it on then I turned it off and it wouldn't start. The pull string is so hard. when it doesn't have a spark plug it pulls easy. The air that comes from...

Id like to start with I'm getting a second gearing set for my go kart I currently have 12T clutch with 62T sprocket the next one I'm getting is a 18T clutch with 60T sprocket how will that do? Current upgrades on Predator: -Governor removed -Performance exhaust -Performance Air filter...

The reciep says 69730 7hp 212cc engine I only see 6.5hp engines idk if that number is good

Ok kart man will be buying it soon. There are different measurements. Like a 3.707, 3.625, 3.303 and quite a bit more what should I get for my predator 6.5 212cc? And what's the reason behind changing it?

Ill check it out but the cam didn't come out when I took off the side cover. What rods should I upgrade to?

Nope same key and same fly wheel the springs were the only real internal upgrade besides govenor and carb

I used to have a honda gx200 on my go kart but it broke down it would take off fast and go fast it had mods like removed governor upgrade 18lb springs new air filter fuel pump and exhaust. So I went to harbor freight got the 6.5 predator and did all the upgrade swaps it takes off slow kinda...

So my go kart axle is to short the tires I have on it now are smaller but it's really low to the ground but if I put any bigger tires it rubs my engine. Could I would something to make it larger or is there something cheaper I can replace it with rather than an actual axle since they are expensive