[PAFR]: Camshaft Edition.

[FreeRunner15]

Oh whats that say.
"Press to close. To open pry off"

LoL
I've only seen a methanol and 30% nitromethane blend.
Never a denatured alcohol 50/50 ethyl/methyl blend.

Works like a charm though .
(o.o) With the proper jetting. ((for the beginners))

 

[Poboy kartman]

LoL
I've only seen a methanol and 30% nitromethane blend.
Never a denatured alcohol 50/50 ethyl/methyl blend.

Works like a charm though .
(o.o) With the proper jetting. ((for US beginners))

There...fixed that for ya.

 

[bob58o]

Is un-grinding the same as welding?
How do you un-grind lift?

 

[ezcome-ezgo]

Is un-grinding the same as welding?
How do you un-grind lift?

Some people call it "ruining"

 

[Poboy kartman]

Some people call it "ruining"

Some call it PAFR.

 

[FreeRunner15]

Some people call it "ruining"

and some call it "depreciation" .
But I call it Tuning for more POWER!!

 

[FreeRunner15]

Enhanced compression ratio. So happy . Even MORE torque!
Now THIS is what separates the men from the boys.

 

[Poboy kartman]

Enhanced compression ratio. So happy . Even MORE torque!
Now THIS is what separates the mentally deficient from the boys.

Fixed that for ya.

 

[FreeRunner15]

Fixed that for ya.

Sorry, I forget there are a lot of people that don't know what a bigger compression ratio does.
It increases overall power throughout the WHOLE powerband.

 

[Poboy kartman]

Sorry, I forget there are a lot of people that don't know what a bigger compression ratio does.
It increases overall power throughout the WHOLE powerband.

And they all live in Gilmore, Texas.

 

[Bbqjoe]

Please make sure to video when you go to start that engine with your modified cam!
'Cause this is something I gotta see!

 

[Jrgunn5150]

it's saddening when you have to un-grind lift from a camshaft :/
Still haven't reached coil-bind but I will save that for another day. around .360" folks!

How did you grind lift INTO a camshaft?

 

[Bbqjoe]

How did you grind lift INTO a camshaft?

The world is in awe and wonder.

It's a little like refinishing, but sometimes you have to restart.

I still don't know why he went to all this trouble when some JB Weld would have worked just fine.
I've done it like a Brazillion times!

 

[FreeRunner15]

Don't listen to these OTHER ppl folks!

Welding is just as strong AND/OR stronger than the metal its self.

anyways, i just re set my valve lash so i should be good to go tomorrow.

---------- Post added at 07:09 PM ---------- Previous post was at 07:06 PM ----------

 

[Poboy kartman]

Since you have decided to pollute so many other threads with worthless irrelevant drivel, I decided to return the favor.

I lost weight and my kart went faster. I put on brakes and it slowed down faster.

The goes moo.
The goes oink oink.
The goes ribbet ribbet.
The goes eeh ahh.
The goes meow.
The goes baa baa.
The goes roar.
The goes cluck cluck.
The goes tweet tweet.
The goes ruff ruff.
The goes squeek squeek.
The goes roar.
The goes cockadoodle do.
The goes buzz buzz.
The goes "it takes a lot of knowledge to understand a camshaft."
The doesn't make a lot of noise.

I like the bunny better.

All I see here is a lot of torque and no action.
Torque is cheap!

 

[FreeRunner15]

Since you have decided to pollute so many other threads with worthless irrelevant drivel, I decided to return the favor.

I lost weight and my kart went faster. I put on brakes and it slowed down faster.

The goes moo.
The goes oink oink.
The goes ribbet ribbet.
The goes eeh ahh.
The goes meow.
The goes baa baa.
The goes roar.
The goes cluck cluck.
The goes tweet tweet.
The goes ruff ruff.
The goes squeek squeek.
The goes roar.
The goes cockadoodle do.
The goes buzz buzz.
The goes "it takes a lot of knowledge to understand a camshaft."
The doesn't make a lot of noise.

I like the bunny better.

All I see here is a lot of torque and no action.
Torque is cheap!

Good morning mister kartman.

 

[Poboy kartman]

Let's see that bad boy in action..

BTW: I've subscribed to the Gilmore Gazette....just as a precautionary measure....so I can keep up to date on the Obituaries.

 

[FreeRunner15]

Let's see that bad boy in action..

BTW: I've subscribed to the Gilmore Gazette....just as a precautionary measure....so I can keep up to date on the Obituaries.

Lol, i'll be fine.
Thanks for going the extra length to keep up with me Hi! *waves at camera*
Cheers to engine power. ( i know it's early but it is worth it)

 

[Bbqjoe]

 

[FreeRunner15]

Good progress!