ezcome-ezgo
G'me sumthin to write on
Well part #62 ain't a belt. I don't know who's drunk. #67 is a belt or a circular snake of some kind.
Who thinks they can help?
- Thread starter Goldwinger
- Start date
Karttekk
Well-known member
This seems to explain it. Belt driven clutch as opposed to chain driven.
www.lancereal.com
Centrifugal Clutch Explained – An Engineer’s Guide to a Centrifugal Clutch
A centrifugal clutch is a mechanical device which is used on driven rotary equipment to control the speed at which the mechanical driven shaft engages.
www.lancereal.com
Hellion
Moderator
- Messages
- 8,908
- Reaction score
- 3,920
Is it a real CVT or just a rudimentary "gear reduction"? Never seen one configured with just 1 variable sheave pulley and 1 fixed pulley. Why not just use a jackshaft? Just wanted some theorizing.
Thanks Karttekkk, but I already understand a centrifugal clutch.
Thanks Karttekkk, but I already understand a centrifugal clutch.
Karttekk
Well-known member
That was a useless link. I was hoping they would shed some light on the advantage of a belt driven centrifugal clutch. Easier to replace a belt instead of messing with chain links and stretched chains. Lower powered engines are probably okay with that setup.
Goldwinger
Active member
Follow up on the jack shaft - it’s junk. I’m planning on replacing it with a chain and sprocket. The drive wheel has a 60T sprocket. What size sprocket is recommended for the engine side of the jack shaft?
ezcome-ezgo
G'me sumthin to write on
Depends on what is turning the jackshaft from the engine. what's the plan there?
Hellion
Moderator
- Messages
- 8,908
- Reaction score
- 3,920
Is the smaller sprocket indeed a 12T?
This Speed Calculator can help as you can "enable jackshaft" and put in the values (teeth count) that will get you the speed you want.
https://www.gokartguide.com/gear-ratio-chart-speed-calculator/
Goldwinger
Active member
12T sprocket.
Goldwinger
Active member
Copy that! Thank you.
Goldwinger
Active member
I think this will work.