T-man's Reverse Trike ( Full Video Build )

Status
Not open for further replies.

TorqueRanger

New member
Messages
257
Reaction score
0
I would like to see you start using gas when mig welding ,so you get cleaner and nicer welds.. But have follow alot of your project and all I can is WOW...:thumbsup::thumbsup:
 

redsox985

Active member
Messages
4,092
Reaction score
11
Location
PA
I believe that he's using flux cored wire so no gas is needed. Also, he machine may not be set up for a gas line and a tank and regulator are pricey.
 

bighead

New member
Messages
4,022
Reaction score
50
Location
Pacific Northwest USA
Looks good t-man.

I used a clevis & clevis pin to hook up my cable end. Then I drilled and tapped the clevis to use as a cable stop. Then used a real cable stop for back up.

Here some pics for you probably have no clue what I am talking about.
 

Attachments

  • CIMG2069.jpg
    CIMG2069.jpg
    74.8 KB · Views: 22
  • CIMG2070.jpg
    CIMG2070.jpg
    87.4 KB · Views: 19
  • CIMG2071.jpg
    CIMG2071.jpg
    84.7 KB · Views: 17

T-man

New member
Messages
1,232
Reaction score
4
Location
Missoula,MT
oh ya, I think I'll do something like that. It looks like I did the right thing in the video up above.
 

redsox985

Active member
Messages
4,092
Reaction score
11
Location
PA
I'm going to go out on a limb here and guess that won't handle well with those up front. :p
 

T-man

New member
Messages
1,232
Reaction score
4
Location
Missoula,MT
red : thats right I will never drive this with those tires on. They also weigh an extra 40 lbs

blue : ya poor thing. more and more is comming off.
 
Status
Not open for further replies.
Top