T-Bucket style Go Kart

[Doc Sprocket]

Sorry- I DID forget about reverse. I have removed mine too, for racing. I would surely think they can put it in upon request. Best is to contact them and ask. Reversed is achieved through a couple sprockets and chain. 1) If they take these parts out, they have them. 2)Maybe, they only remove the chain (#40) making it easy to fix.

 

[IceMan198753]

I'm still looking for hubs. I need at the hub "plate" to be at least 5 1/2 inches across to put my new bolt pattern on. Any help?

 

[Doc Sprocket]

I do. Gimme some time to find some pics/links

EDIT- here are examples from Princess Auto. You'll have to find your own supplier. Just read the descriptions, and it should all be clear. If you need clarification, just ask...

http://www.princessauto.com/pal/product/2080315/Accessories/5-Bolt-Drive-Plate

http://www.princessauto.com/pal/product/3845179/Hubs/3/4-in.-W-Series-Weld-On-Hub

 

[IceMan198753]

I do. Gimme some time to find some pics/links

EDIT- here are examples from Princess Auto. You'll have to find your own supplier. Just read the descriptions, and it should all be clear. If you need clarification, just ask...

http://www.princessauto.com/pal/product/2080315/Accessories/5-Bolt-Drive-Plate

http://www.princessauto.com/pal/product/3845179/Hubs/3/4-in.-W-Series-Weld-On-Hub

WOW thank you very much. I think that is exactly what I was looking for.

 

[Doc Sprocket]

No probs, glad to help. I hope you can find them. Maybe Tractor Supply?

 

[IceMan198753]

No probs, glad to help. I hope you can find them. Maybe Tractor Supply?

Might just order them on-line

 

[IceMan198753]

Just order two of these

http://www.princessauto.com/pal/product/2080307/Accessories/4-Bolt-Drive-Plate

AND two of these

http://www.princessauto.com/pal/product/3845211/Hubs/1-in.-W-Series-Weld-On-Hub

 

[IceMan198753]

Now I am in the process of getting an axle and bearings.

Question 1

What would be a good axle bearings? I have been looking at "pillow block" bearings and have seen them in some pics floating around here. Are they good for go karts?

Question 2 (a dumb one)

How will I hold my hubs onto the axle? I have a key-way and a set screw. Do I need anything else? OR will the set screw hold it from sliding on the axle?

 

[Doc Sprocket]

Pillow blocks are an extremely popular choice for homebrew karts. I use them regularly- including my race tractor.

The set screw is a good start, but a locking collar is a great insurance policy.

 

[IceMan198753]

Pillow blocks are an extremely popular choice for homebrew karts. I use them regularly- including my race tractor.

The set screw is a good start, but a locking collar is a great insurance policy.

Would I put a locking collar on both sides? Is there any bearings that you would suggest? I am running a 1 inch axle.

 

[Doc Sprocket]

Look for pillow blocks with the following characteristics- Cast iron body (not stamped) and ball bearings (not a bronze bushing). Some good ones even have a built in shaft lock.

Lock collars on both sides sure wouldn't hurt. Or, if your hubs get butted tight to the bearings, an inboard collar may not be necessary.

 

[IceMan198753]

Hi ya"ll

Sorry its been awhile, I have been busy and trying to come up with some money BUT I have got the hub shipped in and welded up. I will post some pics prob. later today when I get them uploaded to my computer. I am still looking for some 1" pillow block bearings for this thing. Any help?

 

[Doc Sprocket]

What do you need to know?

 

[IceMan198753]

I just want to get the right bearing. And I can't seem to find one around town so I have to go online and I dont know if the bearings are good or not.

 

[Doc Sprocket]

Here's what I get, and where I get 'em! http://www.princessauto.com/pal/product/3870052/Pillow-Block/1-in.-Pillow-Block-with-Bearing

These pillow blocks feature: Cast iron construction, roller bearings, built in grease nipple, and eccentric locking collars.

 

[IceMan198753]

Wow, those look nice. I think those will work. Thank you so much for all your help toystory!

 

[Doc Sprocket]

Anytime!

 

[IceMan198753]

We drilled our own hub plates.


And after we welded it.

 

[IceMan198753]

Just order....

http://www.princessauto.com/pal/product/3870052/Pillow-Block/1-in.-Pillow-Block-with-Bearing

http://www.bmikarts.com/1-Steel-Live-Axle_p_517.html

http://www.bmikarts.com/Plastic-Fuel-Tank--4-Quart-_p_934.html

http://www.bmikarts.com/14-Keystock-2-or-6_p_520.html

http://www.bmikarts.com/2-Piece-Steel-Locking-Collar-34-1-or-1-14_p_1101.html

Hopefully most of this will be here by the end of the week...

 

[tapkoote]

WOW that gas tank is cheap, did you order a cap?
keep up the good work.