• OFF TOPIC fun forum - NO politics - NO religion - NO jerks. It's not complicated. Thanks!

Post your car!

Scout

Nutjob
Messages
575
Reaction score
20
Location
Indiana
'73 Honda CB750. This is the pic the seller sent, I have since recovered the seat, cleaned the carbs, fixed brakes, and replaced tires. I rode it daily during the summer




'81 Honda CB650. Again, I have since recovered the seat.




'73 IH Scout. Kinda like the Johnny Cash song "One Piece At A Time" only the vin plate is '73.




'98 Jeep Grand Cherokee. The load on the trailer only got heavier by the time I went home.




'64 IH Scout. It was stock when I got it, then I swapped out the sissy axles for better ones, and added power steering, power brakes, and the roll cage. Now it is apart again for another round of upgrades. This time the four cylinder it tossed in favor of a tuned port 305, 700r4, NP 241, and one ton axles. I have also cut out the leaf springs so I can change to links and coils.

 

Scorch3

New member
Messages
164
Reaction score
1
Gotta love the Mazdas i know i love mine its a 2001 Protege LX 2.0L for whopping grand total of 130hp :roflol: it handles really well though. I was going to turbo it but instead i'm going to start saving for an rx-7 project car, i really like rotarys :arf:
 

2or3wheels

New member
Messages
1,294
Reaction score
2
Location
Minneapolis Minnesota
'64 IH Scout. It was stock when I got it, then I swapped out the sissy axles for better ones, and added power steering, power brakes, and the roll cage. Now it is apart again for another round of upgrades. This time the four cylinder it tossed in favor of a tuned port 305, 700r4, NP 241, and one ton axles. I have also cut out the leaf springs so I can change to links and coils.


If your gonna put a small block in it why not go big, 350 at least?
 

modelengineer

Lord of the noise
Messages
1,609
Reaction score
2
Location
Sydney, Australia
Or the engine from the Weineck Cobra (google it)
12.9L (780 cu in) naturally aspirated V8 which makes...
...
...
1100hp and 1760Nm!

Gets a cobra from 0-300km/h (185 miles an hour) in 10 seconds flat with no traction control or stability control!
 

fluxcored

New member
Messages
211
Reaction score
0
Yup. I had a '89 323. Bought for $1900 with 140k miles. Could run circles around 4wd suv's in snow.

I've got an '88 323 that still going strong with the same motor. Imagine a car that's been in daily use for 20 years and never had it's motor overhauled.

Just regular oil and coolant changes and every 200K I replace the belts and pumps.
 

jr dragster T

New member
Messages
3,966
Reaction score
6
Location
Cold place
Or the engine from the Weineck Cobra (google it)
12.9L (780 cu in) naturally aspirated V8 which makes...
...
...
1100hp and 1760Nm!

Gets a cobra from 0-300km/h (185 miles an hour) in 10 seconds flat with no traction control or stability control!

Yeah I googled it and holy:censored: :censored: :censored: It's powerfull!
 

Scorch3

New member
Messages
164
Reaction score
1
I've got an '85 rx7 that I got on sunday. Red GS model with 150,000 miles for $700. Drives great! (I would upload a pic but I'm to lazy to go to photobucket right now

Congratulations. How many miles on the engine? They often have to be rebuilt after 100k but you never know. I'm saving for an 80's rx-7 as well unfortunately around here $3800 (CAD) is a pretty good for price for one that will pass safety. I'm up to $1000 now though so at least im making progress. It just occurred to me how good your deal really is locally an rx-7 parts car goes for $800 (CAD).
 

s101993

New member
Messages
2
Reaction score
0
i've got a '92 s10 with a 4.3 and 5 speed that i drive back and forth to work and a 2008 dodge durango with the 5.7 hemi that i drive on the weekends.
 
Top