lawn boy power

[Denny]

I can lend you my immoral support?

 

[karl]

Anytime!

We have fuel, motors is mounted, it runs well.
Just need to aquire shim stock to fit the rear axle .

 

[karl]

I done used another solution

 

[Denny]

Cool, band brake! Like the Cub Cadet in the background.

 

[karl]

Love me 106.

Sidecar with lawnchair? May build another for that.

Got it close enough to test ride. Rear fender puts in work . Need a 1in brake lever

 

[Denny]

Cool! Now to build that snow plow for it!

 

[karl]

It's got the torque and gearing lol. The carb is very responsive, perfect for a stock flathead

Grips showed up and actually fit. both are 25mm (1") . $7 on amazon .

 

[Denny]

Yea, but will it plow snow?

 

[karl]

I can lend you my immoral support?

What should I stencil on the belt cover/ fender?
Also check this toggle , haven't seen one with a full condem

 

[Denny]

What should I stencil on the belt cover/ fender?
Also check this toggle , haven't seen one with a full condem

Ouchie maker!

 

[karl]

I had to shorten that.

Kill switch operational, and you always have the backup ziptie on the lead.

I learned from past snowbike experience, that the carbs like to ice up on the 5hps, and carbs
with external linkages stick open, so Im hoping the slide carb prevents all that. Really need
to tape up the blower housing some or make a more elaborate solution to direct hot air over
the carb.

 

[karl]

No icing , so that bikes done.

Next?

 

[karl]

Yes

 

[karl]

Need more long 5/8 bolts. But the frames all bent. Just 2 more for the handlebars.
30' of 1/2in black pipe is being used for the construction.

Was trying to build the pop mechanics tom thumb bike
but Its turned out too big. Still gonna be 2 cycle. And it
is still quite small.

 

[Denny]

 

[karl]

Proper DIY here

 

[landuse]

Its looking good Karl!

 

[karl]

Thanks !

I already lied. Was at that place, and had $25 off.
Well I still could go another route but its looking like a good fit.

Also hope the head tubes straight, passes eyeball check
Check out the very scientific jig I used.

 

[Denny]

If the jig is scientific it has to be right. I want to know when you’re going to build a 670 mini-bike?

 

[karl]

What, is the 3.5 fl/lbs of the 79cc pred not thrilling enough?

Briggs 5hp muffler, and 3d printed an air filter adapter.