Found a Honda G200 engine ...

[ezcome-ezgo]

So just any flat window in your house will work?

try to find something thicker, even a mirror

 

[karte_m0lim]

Flat screen tv?

 

[Lucky7]

Flat screen tv?

Yeh but I like my flat screen too much to do that . So any mirror, window, etc. as long as it is flat will work?

 

[OzFab]

Tho my question above ^^ : middle of bolt to midle of bolt on the carburetor is 46mm , carb itself is a 26mm with 5.9mm rods

Can i use a filter adapter for gx200s on this ?

Yes, you can; GX140/160/200 carbs have the same measurements...or, close enough...

 

[Denny]

Flat screen TVs work great because you can watch you're favorite shows at the same time so you don't get bored. Windows also work good also, just make sure there is something interesting to watch out side.

Denny

 

[Lucky7]

Flat screen TVs work great because you can watch you're favorite shows at the same time so you don't get bored. Windows also work good also, just make sure there is something interesting to watch out side.

Denny

Thanks. How long approx should I be sanding the head for and what about the actual cylinder head. The part that the piston sits in. Do I have to sand that.

 

[Denny]

Until it is flat and it will work on any flat engine surface as long as you get a big enough piece of sandpaper.

Denny

 

[DHC]

Yes, you can; GX140/160/200 carbs have the same measurements...or, close enough...

But his isn't a GX...

 

[OzFab]

But his isn't a GX...

Yes, we know; my post was based on this:

Okay guys , a question :

Im looking for a air filter bracket / adapter , and no wonders , due to how old the G series is ( or this engine in particular ) , i havent been able to find any ..

Or at least , i havent found the exact measuers of the GX200 carburetor intake , tho i did measure mine

I was merely stating that the two are interchangable...

 

[NewbCarter]

Yes, we know; my post was based on this:



I was merely stating that the two are interchangable...

Ok then... easy to find those on ebay or amazon.. tho il have to focus on amazon since shipping from US would cost me more than the adapter / bracket itself..

 

[NewbCarter]

Tomorrow

 

[Lucky7]

I am looking forward to that. What color?

 

[NewbCarter]

Here it is , finally done

 

[NewbCarter]

Some more ..

 

[NewbCarter]

And more ... and on the last pictures , you can see the throttle return spring bracket i fabricated out of the old throttle assembly , and welded that to the exhaust .

Also gonna put up a video of it running ...

 

[NewbCarter]

https://www.youtube.com/watch?v=JYK9QOxGqyY

And here it is .

 

[Miky]

Loving it, nice work

 

[Lucky7]

**** that looks good.

 

[NewbCarter]

Tho have to fine tune it once the exhaust is done and the air filter on...

Seems to be running lean ... bigger jet needed since the flow is much less restrictive ?

 

[Lucky7]

Is there a screw to adjust the fuel to air ratio?