first kart!

[robin]

what about fitting a 1inch bore clutch on your shaft

 

[r_chez_08]

I AM NOT DOING ANYTHING TO THE SHAFT
Lol, but thanks anyway, but I do not see the point, when i can get a 20mm clutch

 

[Ibnzmonkey]

I AM NOT DOING ANYTHING TO THE SHAFT
Lol, but thanks anyway, but I do not see the point, when i can get a 20mm clutch

They sell 20mm clutches on ebay. I know they do, ive seen them one there before when i was clutch shopping.

 

[r_chez_08]

some parts i have bought:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270252069146

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270338812556

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=270340904780

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=320249499086

 

[jr dragster T]

So you bought 25 mm bore bearings and 30 mm bore sprocket carrier?

 

[robin]

he is turning down the ends of the bar for the bearings and wheels

 

[r_chez_08]

he is turning down the ends of the bar for the bearings and wheels

yeah lol

i also am getting these brakes

http://cgi.ebay.co.uk/ws/eBayISAPI....m=250368396976&ssPageName=STRK:MEWA:IT&ih=015

http://cgi.ebay.co.uk/Go-Kart-compo...911.c0.m14&_trkparms=66:2|65:13|39:1|240:1318

 

[r_chez_08]

the brakes were £50

 

[r_chez_08]

sprocket, carrier and chain come today woop! the chain might be too small though (34")

 

[r_chez_08]

i now have bearings brakes and axle keys too!!

 

[robin]

any chance of a picture up date ?

 

[r_chez_08]

havent put together yet... post some next week

 

[r_chez_08]

would ordinary bike gear or brake cable work for the throttle?

 

[robin]

yes it would

 

[Kenny_McCormic]

Bicycle cable makes a great throttle.

 

[r_chez_08]

kl thanks

 

[r_chez_08]

upate:
here are some pics of the axle

 

[robin]

wow shiny new parts looks like whoever you got to machine your axle did a good job

 

[r_chez_08]

my brother machined the axle lol. ill tell him that

more pics will come with progress

 

[r_chez_08]

today we (my brother who is helping with the build and i) mounted the bearings, and thought about mounting the engine. tomorrow we are mounting the engine, and mabie welding the steering.

this is the kart upside down, so the bearings are on the underside
i have one problen though, my disc caliper only works one side, like fluid doesnt get all the way to the other side. any solutions?