Jersey 08901
New member
Any body seen this before? 4 hp engine , can a clutch be put on?????
Attachments
-
P_20171126_121512.jpg
Engine shaft
- Thread starter Jersey 08901
- Start date
- Status
anickode
Active member
Probably not directly, but some modification might allow for it.
What's it from?
What are the existing diameters?
What's it from?
What are the existing diameters?
KingCobra
TROLL CRUSHER INC.
Looks to me that someone made that crank shaft work for something else previously. Too bad that ruins them cranks for the next guy.
Nosandwich
The REAL Poboy
What he ^^^ said.
Jersey 08901
New member
The front is 5/8. It's from a edger.
Nosandwich
The REAL Poboy
They make 5/8" clutches.
Jersey 08901
New member
I know. I'm just asking if anyone has worked with this.
Nosandwich
The REAL Poboy
I'd be surprised if anybody had SEEN that.
KingCobra
TROLL CRUSHER INC.
Any body seen this before? 4 hp engine , can a clutch be put on?????
I bet you could change out that crank for pennies on the dollar!! It's really easy to do and we will help you locate the parts and guide you through it. That engine is well worth it. Looks like a Craftsman engine and come to think about it, I've seen that before. Strange set-up for sure!!
Tpdingo
Member
its a T-Type shaft. There are many options for shafts from Honda(and for that matter all the manufacturers) and you could probably get a special bushing with a cut in the shaft.
http://www.honda-gx.ru/size-shaft-honda-gx-160.shtml
http://www.honda-gx.ru/size-shaft-honda-gx-160.shtml
sorry, but the rest of the shaft is likely 3/4" correct?
Why not just add a spacer (keyed) to regain the diameter and make it a 3/4" shaft again?
'sid
Why not just add a spacer (keyed) to regain the diameter and make it a 3/4" shaft again?
'sid
Jersey 08901
New member
Great, thank you all.
Nosandwich
The REAL Poboy
Or a spacer, to lock the clutch, and use the the 3/4"part of the shaft. Unfortunately, the OP chose to only answer 1/2 of my question .
anickode
Active member
Wasnt even your question for starters, and you just offered up the same solution as itsid...
Nosandwich
The REAL Poboy
Wasnt even your question for starters, and you just offered up the same solution as itsid...
EXCUSE ME? Are assigning questions and answers now or....???,
- Status