Search results

That is sharp! I plan to build one myself. I like the fat tire on the front.

Look up common hop ups for the flathead Briggs 5hp engines. Index the spark plug. You can mill the head at home and run a straight pipe for the exhaust but you may have to adjust the richness of the fuel mixture on the carb. Any changes in the exhaust may make the engine run lean. The gear...

Don't put the kart up! Get back on it ASAP!

You should enjoy the Hemi head Predator. I used a Bsp-2 cam in mine with free flowing intake/exhaust mods and Autolight 3910x plug. It woke the Predator up.

Max-torque or Hilliard are two good clutches for yard carts. Look at a torque convertor (TAV) as well.

What have y'all agreed on as "Stock"? Stock appearing? Stock externals? If stock appearing is the rule the cut open the botitle neck of a muffler and gut it out. Those things can't flow well.

I saw the V twin Predator on a huge generator at Harbor Freight today. I didn't find the engine itself just the generator. The clerks didn't know if it was available by itself.

Air in and Air out. Change that exhaust system, air box and fatten up the jet. The "hot dog" style mufflers breath better than the stock one. Build or buy a header. An Autolight racing plug is good for a small boost in compression. Compression can equal Power. I pull the stock plug after the...

Classic have you tried to start the Tecumseh engine?

What throttle set up does it have? Is it like the Grayhounds and Predators? Post a picture of that. Maybe it needs to be adjusted at the throttle stop?

There is a reason it had a 9hp. At minimum a Predator 6.5 with Air filter and Muffler mods.

I have used the old and the Hemi styles. Both are good. I plan to pick up another Hemi Predator. It seems stronger than the standard Predator in stock form.

It appears that you can place an order as small as one. If I read it correctly.

Looking good so far. Those ride very well.

You are going to have some trouble finding a clutch that will engage at that low RPM. You would have to mount the clutch on a jackshaft spinning faster than the engine. Look at this one it's a higher horse power engine but weighs in around 90lbs...

Honda Clones (Predator Engines) best money spent (IMO). I have my Briggs sitting on a shelf and have outfitted my fleet of 5 mini bikes and 3 Gokarts with clones.

I'll make it easy, Just take off the engine and mail it to me. Do you have a stock Predator Carb & Air box? If so I would start by swaping those out with what is on the motor just to get it to stay running.

I have a few of the greyhound "Cheap Clones"and have gotten excellent use from them. If I weren't so cheap I'd take offense to that.

You may want to brace the header any hard riding and it may come apart.

Interesting where you put the jackshaft. Why did you mount it there and not lower in the frame?