Search results

okay so i took it outside today i had a friend push me while i tried to bump start it i know im getting spark. if my timing was off would that effect the engine i feel like it would still fire just not the greatest. anyone have any ideas?

Sorry I just felt like it was more appropriate to put it in the engines section sorry guys

Okay I have a 140cc konker engine my question is how do you set the proper timing on it like the head to the piston I don't have the original flywheel so I can't line up the 2 marks on it I have a inner rotor kit installed the engine was takin apart by myself and I messed the timing up silly me...

Okay so I found the problem it was a bad ground I'm getting continues strong spark now

Yea thts what I was thinking the thing is it's in my basement and I gotta carry it all the way up the stair to outside. Because I do get spark from it sometimes. And last night I was up to 11:40 and found that the timing was off like by 4 minutes. So I set it back, just to be sure do you guys...

Okay guys I have a shifter kart and the engine is a 140cc konker it has a inner rotor kit on it. about 3 years ago when I built it I was having no spark from the engine I found out it was the irk igniter on the inner rotor. now I got no clue why it's not sparking. Tell me if this makes sense, I...

Ya we did and I checked it today and the stator is getting power and the ohms. I was testing it wrong before. So now my guess is the stator trigger unless there's a way to test that

I tried all the ohm settings on the multi meter and I wasn't getting a reading of 100 ohms on any. I'll try checking the voltage

Ok so I tested the stator and it's shot. (Just to make sure I tested it right). I'm sapossed to put the multi meter on ground and on the stator and set it to 200k?

Ok so I hate but love this motor I don't know what happened but now I'm not getting any spark again and I have run out of ideas. somebody Please help me

Yahhhh I got spark. Belive it or not all I did was paint a part. I painted the magneto trigger because I noticed it was coated in a red rubber seal that was peeling away so I repainted it which un grounded to trigger (I think). I tried to start it a few times but ran out of day light. I'll try...

The coil is grounded. Should the stator plat and irk stator be grounded?

Yes they are the same. Chris or toy story just dropped by and had a look at it and we replaced the cdi and coil from the xr100 and we still got no spark. (he's just as clueless as me on this). The only other thing we think it could be the magneto or the wires from it

It's a 140cc konker engine hears the link for the wiring http://tboltusa.com/store/tech.php?pID=59/China+Inner+Rotor+Wiring

Ok so I bought a 140cc engine off of a friend of mine and I was told that it was in good running condition but I got it on my shifter kart and now I'm getting no spark I don't know whats wrong with it I found a wiring diagram online and copied the set up. I'm thinking it could either be that I...

thanks alot every one. i think im just ganna stick my original plan which is a pit bike motor 150cc bored out to a 180cc or a 160cc race engine cause my karts already set up for it

i have 3 karts running on hondas and i want this kart to be insane ive already done crazy amounts of custom stuff to this birel frame. and this is a kart that i want to take to the track every week or so. since i posted this thread ive been looking at 125 yz motors and might role with one of...

hello every one. im building a shifter kart and ive already prepped a ar4 birel frame to hold a pit bike engine but i dont know what type of motor to go with. im thinking of a 160cc yx 4valve. Or somthing thats electric start and will take me to 120 km or more?

a really cool way to increase your clutch performance is you cnc lathe the inside were the clutch pads touch on the outer shell. what happens is the factory doesnt make them 100% perfect. the clutch pads are straight. this helps to break in your clutch and insure max grab

ok cool thanks and what your saying goes for all pit bike motors?