Search results

Anyone have experience with these? I have a mower I am converting to live axle with a 10hp tecumseh and knockoff 30 series. Reverse is very nice when off roading. So after the box, there will be another jackshaft then solid rear axle, for a top speed around 15-18mph. Most of them are rated...

I built this. Why I dont know. What I dont know. Alcohol was involved. It features a very short wheelbase ,high center of gravity ,and bus like steering to make 12mph fun. It turns, and has a gear shredder with extended leverage handle. Front end, axle, and steering are mower parts...

I acquired this thing. It is a proper 4 wheel kart made by AMF Harley , really beefy. It is an electric DE4 from 74. Even still has the Harley Davidson branded tires. I plan on a repower , but still undecided on how or what kind. I have 14in under the seat to work with. The 19.5 opposed...

I got two nearly identical toro s200 blowers, so I pulled the motors. Thinking of doing this. The motor that spins backwards will have the timing re-adjusted. The flywheel fins are straight, and each motor will have its own shroud, flywheel, coil, ect. Cut the shafts down a bit, and use...

So I built a minibike from scratch some time ago, snow is approaching , I have the tracks, it gon happen. See pics.

I saw this at work today. It is on a gc190 e start push mower. Looks like it can go right a predator and give you a charge coil for gauges or a headlight with the factory flywheel. It is built into the coil. Thought I would share my find.

I bought a 94 ranger for $400. The transmission leaked when hot, I fixed it , drove it for 5,000 miles, then the trans puked all its atf. I got tired of dealing with the POS A4LD. And the 4.0l was not very impressive. I came across a 79 mustang cobra 2.3l turbo and t4 Manuel for free. It...

Figured Id show off what I have been up to. After I ran the 20hp briggs twin for awhile, the frame was bent and sagging. For The third time I cut the kart in half and rebuilt. I did away with the torque converter and running a predator again. It has a gx160 head with thin steel gasket and...

Here is my situation I have a hemi predator with , Stock length arc rod Arc flywheel with stock key 32 degree advance Arc filter adapter and top plate Might as well be sponsored by them 18 lbs valve springs Mod 2 cam Header with Rvl muffler So I am running stock...

I have always wanted to do this , and I think my kart would be fun with 20hp and a 40 series tc. This is like a very poor tutorial , so hold my beer and enjoy!

So 3hp briggs do not get much love. This poor motor, about 4 years ago I shot at it with a .22 at WOT and killed it. It sat outside with no gas or oil cap since then. Today I decided to get it running. The bullet hit between the head and block and broke the head gasket. So I hit it with...

I am setting new records in fabricobbling. My goal is to convert my scratch built minibike to an off road beast. And to not spend a dollar doing it. I searched my junk pile and found a set of 18in lawn tractor tires. The front end is simple, i got two 3/4 od 5/8 id bronze bushings and used...

I managed to crank this thing out so enjoy. Zero plans and lots of eyeballing. 1in thickwall tubing for the frame.

Hello, I am building a mild 5 hp briggs, this is what I got cooking. ARC billet rod 18lbs valve springs Dyno Cams 95-4 cam (3500-6500 Rpm range) .027 head gasket + Studs ARC billet flywheel Port work, eyebrows shaved And paint for the extra hps I am looking for a fuel delivery device...

I am doing this for the coolness factor and the motor and pump was free so why not. The motor is a cool bore so it will not be missed. The smog pump is from a 80s gm 350. I made up some manifolds, and mounted up a gy6 carb I got from bmi karts for $1. I modified it for blow through operation. I...

I decided it was about time that i build something from scratch the right way. I bought a pipe bender and tube notcher from hf. I never used a pipe bender before so I mangled 10ft of tubing before i got to what you see. I am building it as i go, no plans . I need to pick up more pipe now so i...

Why I made this I dont know but here this thing is. Its got no brakes, is very unstable, and lots of fun. Just the result of whatever junk parts I had and a weekend. Very old Jacobsen reel mower or generator motor, 1hp maybe? 3 tires off old gokart, some chain, bearings, pulleys, ect...

Hello, I am trying to re-create a fairbanks style two speed jackshaft using two regular max torque clutches for use on a go kart i am building. The only thing preventing me from doing this is the overrunning clutch. I need to find a "one way" sprocket that fits on a standard keyed 5/8 or 3/4...

Well heres what ive been doing lately, Was a mower I got for free from my grandpa, put a 6in pulley on the rear and a shorter belt, locked transaxle, big push bar (overkill), 18in front tires(Jacobson sacrificed), and need to work on the rear. My friend takes advanced manufacturing at...

I had a set awile ago from a john deere 111 mower, pretty sure they rusted to an axle and couldent get them off. They let you run 5 lug tires in the 23in range on a standard 3/4in shaft lawn mower transaxle. Looking for another pair that wont break the bank. Theres a pic of them below. Any help...