Search results

Its like the key of the pulley isint cut right that slides in between the shaft.

Is it hard to slide a 3/4 shaft through my 40 series driven pulley? I had to use a hammer to get the pulley off. Its for my yerf dog 3203.

Does the following bearing have that snap ring around the outer where it keeps the bearing from sliding in the housing? look at the link below. http://www.mfgsupply.com/9-327.html

what was the size of that jack shaft housing bore with the blue kart?

how long does the jack shaft needs to be?

Will this work? Dont know if it has threads but I know they have bearings that you can lock them by screwing a screw. http://www.bmikarts.com/item/34-Keyed-Shaft-400134--1357

lol, im sorry, I meant its a 3/4'' driven pulley. It wont slide on the old 5/8'' jack shaft. I need help finding a 3/4'' jack shaft that will slide in the yerf dog jack shaft housing. It will be a lot of work unbolting the engine and the frames cage to replace the whole engine mount. I drilled...

Where can I find a 3/8 jack shaft that will fit the yerf dog 3203 stock jack shaft housing? Trying to get the 40 series driven pulley on. look at my photos. http://www.diygokarts.com/vb/attachment.php?attachmentid=26441&stc=1&d=1348348731...

I need help finding a 3/4 jackshaft that will fit in the stock yerf dog 3203 jackshaft housing. I don't know how long the shaft needs to be to fit through my 40 series driven pulley.

will a 3/4 keyed shaft fit the yerf dog 3203 jack shaft housing? http://www.bmikarts.com/item/34-Keyed-Shaft-400134--1357

Well guys I got the ex27 motor bolted on. I used the same jack shaft but had to drill 2 holes on the right side of the frame.

Is it possible that I can use the same engine mount plate and just drill holes through the plate to make it work?

Do I need a 7/8 or 3/4 bore for the driven? http://www.bmikarts.com/item/40-Series-Torque-Converter-Driven-78-Bore-464778-7853

Can I use a 40 series TC driver and a TC 30 series driven with a 30 series belt? I haven't bought the 40 series TC driven part nor a 40 series belt.

Torque Converter 40 series. http://www.ebay.com/itm/400304904222?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

pto?

Is the ex27 engine shaft long enough or do I have to make some modifications for my yerf dog 3203? its 1"x3-21/32" Shaft http://www.ebay.com/itm/200818258844?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

what should I do to get it bolt on correctly? Do I have to drill a hole in the frame?

So, the ex27 engine should match the old bolt patterns the stock engine did?

Does the ex27 robin engine come with the electric start when bought new?