Search results

I say float problem or needle and seat, causing gas in the cylinder as it seaps past the rings.

Sometimes it takes multiple pairs of eyes to catch something, and JT, thread isn't usless without pics. Doesn't apply to every thread. You could easily look it up online.

I liked the stepped ones, work great eith the stepped hubs, don't have to worry about stuff moving too much.

One of the front ones is missing a bearing...

Most engines won't even rev high enough with the stock valve springs to get to a point where they'd blow a rod. Other than tecumseh's but those are special

Got one of those, good karts lol. Only problem I had was when I moved the axle down to fit a tc the brake didn't fit right, had to extend the rod.

What stuff? I'm sure you're aware that gear ratio is everything but should be clutch to jackshaft sprocet and jackshaft axle. And what about the tc is exploded?

Thx 'sid saw another thread a while ago and completely forgot about it

Little update: Red kart sits in pieces, I'm in the process of fixing it's axle. When I got it apart I saw that it had spun both bearings and had worn the axle out, so it got welded and then most of the extra material ground off and I've been in the process of filing it all back down to fit new...

Was once pretty, but dumb ideas lead to bad fabrication and too big engines. My newest, was supposed to have a comet 20 series and smaller engine, someone stuffed a 13hp engine in it and welded the sprocket of a clutch on the jackshaft and messed up the gearing bad. Also broke the front spindles...

I've got no problem with Tecumseh flatheads, never had a ohv one tho. My father buys snowblowers to repaor and re-sell, we have 3 ariens that we keep, all with tecumsehs that all run great.

Ground kills it...

I meannnn I've thrown my sister off my kart before, my two seater, had a 3.5hp clinton and cc, in the grass. She wasn't holding on. Lonnnnnnggggggg time ago.

Tis not an express, atleast with that front end. The fronts on them are flat like a dingo I believe

There's 1in. 30 series drivers. They exist. 30 series is rated for like 8hp though. So no 13 hp with a 30 series🤷*♂️

JT! man stop yelling at him lol, and I don't think an axle is suspention and he also said he was planning on getting a new one. Gopowersports and bmi karts have parts like axles and sprockets as well as torque converters. But yes you'd wan't a gear ratio of atleast 6:1 ---------- Post added at...

On the topic of rolling things I just rolled my one kart acouple weeks ago, glad I was wearing a helmet. Went around a cul de sac too fast and it rolled, luckily into the grass in the middle, I was left on the ground and it flipped back over, acouple bruises and some grass stains, I was lucky...

My grandparents brought a dingo up to me ~500mi and it sat upside down the whole way, cylinder was full with oil when I got it, after pulled the plug and spun it over a bit good to go but smokey startup. Burning off the extra oil left.

Post some pics! Let the fellow kart peeps see them

Something that happened to mine: I used the parking brake and then my friend hopped on and ran it probably 3/4 of a mile down the street before the brake started squeeling