Search results

where would i go about buying a back wheel that would work on a mini bike that has the 4 bolt hole pattern so that you could attach the sprocket and the brake drum?

yep, homedepot and lowes has it, it comes in a big metel jug and it comes with a spray bottle. If i remember correctly i think its about $18 or a little more.

thanks for the help.

where do you buy the clones online?

alright, how much would i be able to find a used briggs flathead for?

Are most of the mods for 5 hp motors only good for briggs. Or would they work with other motors like honda and craftsmen?

alright thanks for straightening me out on that, I guess i wil buy a new clutch from northern tool. the clutch i have now has a 12tooth sprocket and a 60 tooth on the axle, would you suggest going more or less teeth on the clutch to give the kart more speed?

Im still not to sure about the clutch because the clutch part moves back and forth but from what you are telling me thats good, the clutch shoe on the other hand is basically just sitting on top of the clutch. when you have the chain and everything hooked up the motor just boggs out becuse the...

Well it does have a little set screw hole but no set screw.

alright, shold i buy one from northern tool or get one off ebay. Ive never ordered a clutch before so im not sure witch one would have the best quality.

ive got the snap ring. it seems like the entire clutch is moving back and forth on the shaft. it has the groove that the clutch gos on and theres a bolt that gos in on the end of the shaft.

yeah, its pretty old, would you suggest buying a new clutch or is there some way of repairing the one i have now?

I've repaired my 5 hp craftsmen and i went to mount it tonight and the clutch is "wobbily". everything is tight but the peice with the sprocket on it slides in and out. does somone know what it wrong with it? also when it idles the hole thing moves and not just the clutch part.:confused:

alright thanks, Im gonna open up the engine tonight and see whats wrong.

I pulled the spark plug and tryed to turn the engine and it still wont move. Is the engine seized. If so is a seized engine rebuildable?

ok i will try that. I dont know much about engines but what do i do if the cylinders flooded?

I got a 5 hp craftsmen today from a friend and he said it ran fine. I got home and put fresh gas in it and started it. It started on the third pull and sounded great. I let it idle for a while then it shut off. When i went to start it again the pull start wouldnt budge. I took the shroud off and...