Search results

Try this vendor https://www.vpowerequipment.com/searchanise/result?q=Predator%20electric%20start%20kit

Here is an image of your setup. Try and straighten the mount plate as best you can, make sure all 4 bolts are installed in the plate and torqued then use this bearing set to lock in the bearing. https://www.napaonline.com/en/p/NCB39150

Check for a stuck brake caliper.

Another thing you could try is disconnect any plugs or connectors then reconnect them. Sometimes a simple disconnect/reconnect fixes these mystery problems. Maybe a pin in a connector isn't completely seated. Worth a shot. A test light is your best friend with problems like this.

This is after the fact but your best bets with karts like these are the Hammerhead or Trailmaster products. Parts and support are readily available. See if any of these vendors can help or suggest something. https://www.gokartmasters.com/ https://hammerheadperformance.com/...

Looks like a Dongfang product, if so, maybe try contacting Dongfang. http://www.df-motor.com/product.asp

Do you have a 12V test light? Does it crank but not start or does it not crank? Sounds like a pinched or crossed hot wire. Get a test light and start testing for hots where there shouldn't be like a ground wire. Is there any adjustment left on the brake pedal rod? Could be out of adjustment.

Should be under warranty. Call the vendor.

This was taken from an American Landmaster GY6 150cc service manual. Should be the same as yours.

Glad to hear it!

Check for a cracked carb base gasket, could have a vacuum leak causing a lean condition. You may have cracked the intake manifold, the part the carb bolts to. Take it off and check for cracks. https://www.rollingwrenchdenver.com/products/gy6-intake-manifold

Take the electric choke off of the original carb and put it on the new carb. See what that does. Are your vacuum hoses hooked up correctly?

Maybe find a service center near you to get assistance. https://razor.com/support/service-center/

These have electric chokes. There is a pintle in the choke that is wide open to let excess fuel into the intake cold starts. As the engine warms up the pintle closes into a bore and reduces fuel flow. If it was working before the carb swap you have something else "effed up." Check what Denny...

There are illustrated wiring diagram links that might help at the top of the page.

Check here for a wiring diagram https://www.electricscooterparts.com/razordunebuggy.html

What happens with the throttle cable disconnected?

Talk to these people. https://www.electricscooterparts.com/

Why not pick up something like this and be riding your kart in 15 minutes? https://www.northerntool.com/products/item-107750-ironton-212cc-ohv-horizontal-engine-with-3-4in-x-2-19-64in-shaft-is-not-currently-available-please-see-item-45751-ironton-208cc-engine-107750

https://www.smallenginesurplus.com/tecumseh-lh195sp67514-snow-king-engine-part-905368-p-3899.html