Search results

Other side with five terminals.

Have checked and there was definitely no ingot with them

I should add it's billed as 36v 800w so fine in theory for my setup. ---------- Post added at 07:34 AM ---------- Previous post was at 07:32 AM ---------- Nope. No labelling at all. The switch seems to have three "tiers" to it as seen. My brother might have a meter. Trying to get hold of him now.

Thanks sid. No schematics I'm afraid. I guess it's trial and error this evening then. ��

Another picture of side

Hi guys. I have got a forward and reverse switch to wire into my karts. Trouble is being a novice and the fact that the switch came in a clear packet and that's it, I have no idea of how to wire it in. It needs to go in between the controller and motor right? I have put a picture of the...

Brilliant, hopefully getting some tube from a local supplier today and then i can really start to get on with matters. b

Brilliant, thanks. I think it all makes sense so hopefully should be good. Just to clarify, the extra black wire fromo the charging port can just be left or should i look to connect it somewhere? Still trying to figure out the best brake situation, that will require some further thought i...

Hi all, As per my post in the other thread, i need a bit of confirmation/guidance for the controller wiring. Any thoughts? Thanks Ben ---------- Post added at 06:29 AM ---------- Previous post was at 06:28 AM ---------- arrrggghhhh video not inserted, must have done something wrong! sorry...

Hi Leonsmum. I have put some more information on your post, hope this helps. I will try and also have a tally up to see how much i have spent so far, might be something that i would rather i didn't do though, he he. I have had double the costs though as i have had to buy two of everything as i...

Hi, I am in Norfolk. These are the two Karts I have to modify, both similar, one just a bit slightly bigger than the other. I am pretty handy with tools and will try to get a handle on most things although the electrical side of things is going to be a learning curve that’s for sure. I have...

Hi, I am doing this exact thing at the moment. I have been looking at sourcing all the parts separately as in the uk and couldnt find a kit,plus I find it rather fun muddling through! I have been gathering parts over the last few weeks and currently have the following: 36V 800w motor Speed...

Hi FA. Funnily enough. That's the one bit that kept cropping up. Don't use the car chargers on the sla batteries. Thanks. I will sort a couple out. Decided that I am going to have a dry run of wiring it all up. A desktop exercise so to speak. I can then check everything I do before...

So, batteries are on order and should be here in the week. Thoughts are turning to charging. What's the best route to go down. Obviously they will be in series so 36v. Is a 36v charger the best option and possible? Or will I need to buy a 12v charger Andy charge all separately. This would mean...

Do you know what, i was literally just trying to work it out. I just want an ignition type switch, happy with key or simple rocker, i had figured that a rocker switch will be easier as i dont have to worry about lost keys then. I have the 36V 800 watt motors, speed controller to suit. I was...

so i need to focus on finding a switch with the correct Amp rating then. Thanks b

So, parts are dripping through the post. I now have motors, speed controllers and rear sprockets. I have been casting my eye to switches now but feel a bit lost. I am not really fussed by having a key ignition but maybe have a "on/off" switch and then fancy wiring in a reverse switch. Point I...

Thanks Sid. No way they will be full throttle round here. Should give plenty of run time for them. B

So I managed to have a little shopping spree this afternoon and now have a couple of 800w motors on the way with some speed controllers to match. These motors are 36v so was looking at getting three of these batteries for each. Should work shouldn't they...

Hi Danny, Of course I will keep progress updated. I will try to remember to start a build thread. Problem is I take some pictures at the start then crack on, keep coming back to it and at the end think “Ahh rubbish, I didn’t take any pictures through the process!”. I will give the 11x70 a try...