Search results

Via PayPal yeah. 0apr for 6mon or I did find a dude locally with a same kart for the 2300 tho. Maybe I can haggle him a tad. Maybe both.... this morning my son said it would be cool to have a gas and electric kart. He's really sensitive to noise.

Topkart got back to me and this is the items I need. The master cylinder might need some love to make it work mounting wise. I did find another TopKart locally that is complete for 2300. Debating what I should do. Ha.

I thought the same. Plate on both sides to get 4 mounting holes.

I was thinking something like this.

Simple monk that is terrible I know. I am using a SurRon motor. Biggest issue I've have is just two bolts to hold the motor. My plan is to get two cuts of the 3/16th plates, welded bottom to another plate and gussets. Thinking i should add a bolt to help with any flex at the top area.

I have no reply just yet. Would moving to a 30/40mm make my life easier?

I have a Topkart Surf rolling chassis, it has a 50mm tube and running into issues sourcing parts for the braking. I pretty much need everything. https://photos.app.goo.gl/uGZ5C2MbNYUvQ9Ug8 Any gurus in the Los Angeles area willing to lend your advice would be awesome. New to this and my boy...

Haha. Yeah I'm going to build a smaller 48 volt pack just for now and playing around. Total greenhorn on karts so I have time to figure out placement etc

Other kit came in, works fine was able to sort the cables better. At least they were labeled haha.... I did have to take two 36volt packs I have and connect them up to get over 48 volts... total was 80.... on the controller has a pin for 48 and 60v. Motor got hot after about 8mins of full...

If you have 600 cells, you can draw one amp off each cell however you have to build the pack. If you do 14s100p, that would be 6amps per cell to hit 600amps. Adding more helps the load and stress on each 18560. My plan is to build two 7s60p packs for 48volts, maybe...

I had a feeling that might be an issue with the 36v pack. Voltage on it was 42v. Going to try my luck with another brand.... or china factory HA!

ditto! i did go to this link tho https://venomkarts.com/ pretty cool

I purchased this kit https://www.amazon.com/gp/product/B07FBBDZQD and i am semi regretting it but my thinking its cheap, if i mess it up oh well and i have never done this before so its a good learning curve. i hooked up a 36volt pack and not getting any movement, the wiring doc is pretty...

i am building a powerwall with 18650s right now i have about 2200 batteries around me, each cell is rated for 2600mah and they all test for 2500mah or better. i cant tell how you configured your battery, 13s or 7s? i planned on 14s for a 48volt. cool find on the cmax, are you using it now?

i am going to build a 14s10p or maybe 20p battery pack using 18650s, however just in the planning phase for the battery. i know how to wire it up just stumbling what it should go in... and look so bulky but keeping things safe. anyone else actually building these? thanks