Search results

Here's a better pick any idea who makes this http://www.diygokarts.com/vb/attachment.php?attachmentid=78261&stc=1&d=1477874017

Brother in law just gave my sons this chopper throttle is busted front brake doesn't seem to work either

So now I can't get the hob off the axle I'm assuming the hub spun on the shaft with the set screw ran in tight And created a groove or a bur now I can't get the hub to slide It spins but won't budge and it's off by about 3/4 from where it was. Thinking about trying to press it out if not I'll...

Gotcha

I was thinking about some hose clamps seems a little extreme to have 2 collars For each hub. What type of pipe clamp where you thinking of Thanks again Mike ---------- Post added at 08:03 PM ---------- Previous post was at 08:01 PM ---------- I thought the set screw was gone but when I took...

Got my sons kart going new axle 3/4 With 3/4 hubs and the other day it through the chain. After looking at it I noticed the key on the sprocket was missing. Just noticed the set screw is still there. And there is another hub for the brake disc. Screw is still there and the key can be slid right...

That's awesome can't wait for some racing videos. Are you allowed to have a wing that moves Around here the big block supers the wing flattens out in the straights For less drag then tilts when you lift

Should be fine for now It's for my 13 year old son He doesn't quite fit in his little brothers kart http://www.diygokarts.com/vb/picture.php?albumid=1035&pictureid=7210 Having trouble with pics and my iPad

http://www.diygokarts.com/vb/attachment.php?attachmentid=76905&stc=1&d=1475287337

http://www.diygokarts.com/vb/attachment.php?attachmentid=76904&stc=1&d=1475287154

http://www.diygokarts.com/vb/attachment.php?attachmentid=76900&stc=1&d=1475285512

Got it 300$ runs great looks mint http://www.diygokarts.com/vb/attachment.php?attachmentid=76857&stc=1&d=1475184259 http://www.diygokarts.com/vb/attachment.php?attachmentid=76857&stc=1&d=1475184259 http://www.diygokarts.com/vb/attachment.php?attachmentid=76857&stc=1&d=1475184259

My brotherinlaw found it at a side job he was doing It started up they want 300$ anyone got any exp with these Looks good for my older son 13

http://www.diygokarts.com/vb/attachment.php?attachmentid=76857&stc=1&d=1475184259

Brother in law just sent me this pic Any clue what it is Looks like a lot of toe out And that steering setup is weird ---------- Post added at 05:13 PM ---------- Previous post was at 05:11 PM ---------- Trying to post pic with iPad arggggg ---------- Post added at 05:14 PM ----------...

Jack shaft I read that but guess it didn't register

Not sure what rpm you turn your engine but it would have To be more than 20,000 rpm for the axle to spin 5,000 rpm I would try those Good luck

in stead of buying a cc and rebuilding that crusty jackshaft setup. would it be better to get a knock off tav for 75.00 http://www.ebay.com/itm/GO-KART-TORQUE-CONVERTER-KIT-CLUTCH-3-4-COMET-TAV2-30-75-218353A-12T-35-10T-41-/391374800843?hash=item5b1fc187cb:g:RbMAAMXQTT9Ru8dN are these tavs ok or...

---------- Post added at 05:23 PM ---------- Previous post was at 05:22 PM ----------

my son got this kart from his uncle. the more I look at it the more I think it needs a complete new rear axle setup wheels everything. I could probably buy a better kart cheaper. it appers to of had a diff that was junk and now has a 3/4 non keyed axle jammed through the diff. and some sort of...