Search results

Yeah you're right. I was assuming that he was getting rid of the wore knobby tires and using what looked like a 20x10-8 turf savers that it was propped up on.

I'd get a riser kit for the engine, get rid of the sprocket on the jackshaft, use the TC (30 series), change out to a 10T sprocket on a driver, and add a 60T sprocket on the axle. Should do fine with a #40,#41, or #420 chain. I like #420 personally but others work. Comet belt only. Good luck.

I say the same thing every night 🤣

They finally got it shipped out to me. So far, everything seems to be good quality and everything I ordered was there down to the last bolt. They even took the time to offer a few pointers today before I started breaking it in. Shipping did take a bit long but now that it's here, I'm pretty...

So I'd like to be able to make and fix my own frames and don't have the equipment. I don't really want to fill tanks all the time so would a flux core welder work? What amperage should I be looking at? Is there a good, cheap brand to go with? Will I be able to plug it in a normal wall outlet so...

I don't have a Wild Cat personally but it'll probably be the next one I buy. They seem to be pretty solid engines and they claim to have the most torque for their size. A lot of the parts/upgrades are interchangeable with the Tillotson as well so that's definitely a plus. Good price too. I'm...

Seems like it should be possible as long as the mc is big enough. You might could run it like a regular car mc with an individual line for each caliper. Seems like it'd work fine as long as you bleed the air out good. On another note, you could always install a backup manual handbrake for...

At the time I ordered, everything was in stock (Oct 22). I contacted them today (Nov 2) and they said they were out of torque converters and they were backed up on their engines. The guy told me it would probably be the beginning of next week before everything could be shipped. I'm trying to be...

Ahh ok my bad lol for a second there I thought you were trying to run a chain where the belt is supposed to go hahaha

Welcome! I've only got one eye so we should get along fine lol

You're probably wondering whether to go with a jackshaft mount that bolts under the motor and behind the motor on the back side or going with a plate that has the mount built into it??? I've heard multiple things either way so I believe it's personal preference. Personally I removed my under the...

If you're using a torque converter, you only need one chain (jackshaft to axle sprocket). The belt connects the pullies.

So I've been waiting over a week on an engine and torque converter from GPS and haven't heard anything from them and the last message I got (order confirmation) is still saying awaiting order fulfilment. With my last order, they spelled my name wrong and didn't even include everything I ordered...

Welcome. Whatcha working on?

I've got one you can have if you pay shipping or live near knoxville tn. For $50 plus shipping I've got a running motor and I'd throw in the old carb too and an extra brand new ignition coil...

Wow! Those are some awesome frames! Good find!

If either are slipping, you could sometimes see it. If either of the pullies are dirty, have rust spots, or springs inside aren't functioning properly, it won't engage or disengage properly. Mine had been sitting for 15yrs untouched so I knew I'd need to replace anyway. Check the wear on the...

I'd prop it up on blocks and run it. Watch both the chain and the belt to see if anything is slipping. It does seem like it'd be the chain but I've also had a driver not work properly and "grab and let go" of the belt. Shook pretty hard off and on. Also check the sprockets and see if there's any...

Are you in the bat cave taking that pic? Lol which hole are you using on the driven? Is the chain getting stuck? The #40 chain is slightly thicker than the #41 and #420. Can we get a pic of the back end? Did you have to replace the shaft when going from a 30 series to 40 series? What's the bore...

I'd think it'd be a jet issue but someone with more knowledge should answer soon. Its in the basics probably. Fire, fuel, or air.