Recent content by Vengence99

Wow!!! I guess the guru at bmi knows more then every pro engine builder. But unlike him I have seen them come apart. Why do u think they make billit parts? So the chance of it happening .... Doesnt.

The 8 is a nice motor if you leave it stock. I've built alot of briggs motors and the 5 is the way to go if you plan on making power. It's really Pricey and hard to find parts for the 8. I just sold one of my 5s that made 27 hp. And i only spent about 400 building it. But you must do the work...

I would not recommend removing the govener unless you buy an aftermarket flywheel. The stock one will explode around 5000rpm. It could really injure or kill someone. I built an 8hp for a mini chopper and made an intake to fit a vm22 mikuni. A 15 pilot, and 95 main work awesome. The intake just...

We usually run at the 1/8 mile track. But yes there's plenty of room. The bike is 40in. Tall and 7ft. Long from axle to axle. It's running a 172cc motor with a compression ratio of 17.1 it runs on alcohol, 18 tooth counter sprocket and a 33 tooth axle sprocket. The swingarm is extended 38in...

Well here in ca. This is anything but street legal. Plus its for my kids. I have a hard enough time finding tracks that will let it run. It will out run alot of jr dragsters. The other parents complain saying its to small to be so fast.

Internal nitrated hardened cluctch gears,

This is nothing. In a few days i will post pics of the new one. They are identical bikes but built different. The new bike has a 192cc built motor, turbo with 13lbs of boost. 15 shot n.o.s. Tilly alky carb . 2 fuel systems and alot more.

This is a pic of 1 of my sons drag bikes. This is one he can wreck on, and learn to ride. Ive also got another just like. This one only does about 80mph. The other is to much for him.