Recent content by Sanch109

Thanks for the graphic. That is really helpful. My Kart no longer moves forward because I lowered the idle. I had been messing with the idle previously, so I guess I raised it too high. I edited that last post to reflect that the kart isn't moving forward anymore. I really appreciate...

Thanks for the advice. I have a spring on there for the throttle.

I lowered the idle and the kart doesn't move forward when changing the lever to start now.

I got the Kart running thanks to all of your help. However, I have a new problem now. When I start the predator 212 and move the lever from start to run, the kart start going forward (accelerating) quickly. What could be causing this? What do I need to adjust? Thank you for all your help.

Solved it. clogged jet.

I did turn the idle screw. I am not sure if this will cause the engine not to start.

I bought a predator 212 Hemi around June and did the initial 10 minute run for the break in. The engine turned on fine. I drained the oil and added new oil for the next part of the break in. I ran into issues with my kart so the engine sat for almost 2 months. I finally have the parts for my...

Sorry for the delay but I was finally able to get the measurements for the belt size. I only moved the engine for the measurements and left the drive shave in the same position. the measurements were 8 1/4 and almost 9 1/2 inches. I am looking forward to hearing back on what size belt to get.

Hello Jim. I received the package yesterday. Thanks again for cleaning them up, they look great. I will get the measurements for you this weekend. My weekdays are busy at the moment. I did order the driver pulley last week so I should be receiving it soon.

Hello Jim. I just now sent you an email to info@maxtorque.com. How would I get an update at your shop?

Thank you for taking a look at the pulleys for me. From what I have learned recently, I thought the driver was a 30 series and the driven was a 20 series. So it sounds like I need to buy a 20 series Driver pulley. I do not fully understand your 2nd paragraph. I will send you an email.

Hello Jim Donovan. I mailed you the Driven and Driver pulleys. They are scheduled to be delivered to you on Thursday, 7/18/24, by 9pm. I really appreciate your help.

I took off the Driven pulley and it measures a little over 7 inches. I guess I have a 7 inch pulley then.

Great. It sounds like I will be mailing JimD the parts as he requested. I appreciate it.

Thank you for the information and help Jim. I will let you know if I will send you the parts.