Recent content by nixta

hi guys my kart is over fueling but cant ajust it back anymore what can i do:surrender:

When using a angled engine mount do I have to top the oil level up to the dip stick or will it still be ok:huh:

Ok runs on idol perfact when acceleration is applied back fire comes thru carburetor and motor dies any ideas guys

carb pics Here are pics of carb

Hey guys jus a quick question I gotta advanced timeing key with way round does it go or don't it matter lol:wai:

Does anyone know how to advance the timeing on a lifan honda clone to 31-32 degrees

Ok I'm stumpd I've changed the fuel I've cleaned th carburetor changed the carb to the original checked the cam is dot to dot with the crank lapped the valves removed the 18lb valve springs and installed the original one's set the valve lash to the standard and tryed it set it to the cam card...

Your right very few people can drive fast cars well see........

Ok Had my head off and had a:idea2: and used a straight edge to set my piston at exactly at t.d.c would this be correct or am I going to:censored:something up royaly:rolleyes: am I correct in assuming that guys

:surrender::surrender::censored: I took advise and lapped my valves indexd my sparkplug.checked my cam dots lined up set valve lash to what the cam card says motor only runs on choke dies when choke is switched off any ideas guys:mad2::mad2::mad2:

So here r the pics of the head and the engine numbers if any one can identify please

:stir: hi guys so had some time this weekend and popd into the local scrap yard and found a honda clone :wai: it's not a 6.5hp I'm sure it's a 5.5hp so I checked the head bolt pattern and it would fit ..it's gotta small combustion chamber but unshure if it's a good idea to fit it especially cos...

Hi guys can anyone help me out with information on how to replace the valve seals please pics, video would be great:cheers2::huh: because upon further inspection I found mine are a bit oval-shaped I'm thinking that's my problem as well :censored:

How to fit valve seals on a honda clone, there's no info on youtube

pics of exhaust etc Here's some pics guys