Recent content by hellsgrave

Instructions? Russ2251

Flywheel How would I remove the flywheel on a Victa engine?

It's already a horizontal. Have turned the carb.

Not quite, joined when I was 13, about a month ago; now I'm 14.:D

What would be recomended for a low budget, low repair setup?

I'm a bit confused with the throttle on my gokart. On the carburetter there is a cable that controls the engine speed and on the bevel gear box for the self drive system, there is a cable that controls if the engine is powering the wheels. Which is for the throttle and clutch. Should I have the...

Throttle control Thanks thechief86 but i'm a bit confused with the throttle on my gokart. On the carburetter there is a cable that controls the engine speed and on the bevel gear box for the self drive system, there is a cable that controls if the engine is powering the wheels. Which is for the...

Does anybody know the power ratings (HP, RPM) for a victa Series 70 Mark 2 lawnmower engine?:bannana:

Thanks Thanks, I am going to start looking for one. Meanwhile I will start building the chassis for the go kart.

How hould I go about making it a horizontal engine do I just need to turn the carburetter on its side as it is a two-stroke. Where could I get the two stroke oil in the south-east of England; would Halfords sell it?

Broken fins Why should I not use it with broken fins. It is going to take a lot of work to get another flywheel. Could I weld or bolt them back on-I still have the broken ones.:oops:

Success!!! Success!!!

I am having a little trouble removing the bolt from the drive shaft, it is holding on the blades and the engine cant be removed with it on. I have tried wedging the flywheel but 6 of the fins have sheared of already. I have access to limeted cutting equipment (hacksaw, boltcutter and hammer.)...

More images.

Here is some pictures from my lawnmower.:wai: