Recent content by Dazv

  1. D

    Faster gx160?

    Hi guys thanks for the replies! Umm I have no idea of the size of the fly wheel when I stripped to engine down I remember it being around 10 inches? The rear wheel size is 11 inch I believe and in regards to photos I think I'd end up throwing my laptop against the wall and I'm not that great...
  2. D

    Faster gx160?

    Haha where I can drive there isn't any hills! Umm not sure the weight of the kart I'm guessing 100lbs? I weigh around 180, I've heard removing the governor but don't want to blow my motor? Thanks for the reply
  3. D

    Faster gx160?

    Hi guys So I've had my kart up and running for Afew months now and really enjoying it but I'm now looking for a bit more speed. I've got a 15 tooth clutch and 90 tooth spocket to make it 6 to 1. Is there and way to get a bit more speed other than changing the spocket which could ruin my...
  4. D

    Predator wont fire

    I had something similar happen to me recently and with help from this forum I fixed it. It was a problem with the valves, the valves had slipped off the arms was really obvious when I took the cover off.
  5. D

    Hot clutch!?

    Thanks for all the Info buddy, I've ordered a 90t sprocket and I'll see how that goes! I just hope the inner hole on the sprocket is the same as the one I already have as I had to make a custom sprocket carrier for it so I'm hoping it will fit on the same carrier!? There is so much to kart...
  6. D

    Hot clutch!?

    Also another quick question, what the heck is pitch? Is it just chain size?? Cheers guys
  7. D

    Hot clutch!?

    Ok cool I'll keep an eye out for another cheap clutch. I believe my chain size is 219? I just hope I don't have to start again buying a chain sprocket and clutch! So is a new clutch what you would recommend to fix my problem? Thanks a lot mate. Darren
  8. D

    Hot clutch!?

    Hi guys this help is much appreciated! Yes it did drive with the current gearing, so you'd recommend just buying another clutch with 12teeth? Things seem to be a little more expensive over here in the uk as the cheapest clutch is around £30 which I think is 50 dollars so the cheaper the fix the...
  9. D

    Hot clutch!?

    Thanks for the quick replies! If it were you guys what would you do? Also with the fixes you suggest what do you this the top end speed would be? Thank you very much for all the help!
  10. D

    Hot clutch!?

    Ah ok so the cheapest option would be to change the rear sprocket but I would need a 90 tooth for 6:1! Would that not make the kart really slow? Thanks for the help Darren
  11. D

    Hot clutch!?

    Hi guys, so I got my first ever kart project working last night with some advice from guys on this forum but I've come across a clutch problem. The problem is the clutch got very hot and even seemed to produce some smoke! The gearing on the kart is 15 on the clutch and 63 on the sprocket. I...
  12. D

    RE. Honda gx160 help!!?

    Yay! Well you were right about the valves! I took off the valve cover to see that the valve arms had slipped off the pins so it wasn't compressing the springs at the back. Put them back on and it fired up first pull a load of smoke and Afew bangs but then seemed to run just fine! Thanks so much...
  13. D

    RE. Honda gx160 help!!?

    Thanks again for the quick reply! I just put some file down the hole gave it Afew pulls but it didn't run or fire up. There is a spark if I hold the end on the plug near the engine it jumps across but doesn't seem to spark if it's on it's own. It's so strange it was running just fine yesterday...
  14. D

    RE. Honda gx160 help!!?

    Hi mate, yep the dots are lined up and the engine turns over just fine but doesn't fire. I took the carb off and drained it which didn't help. Any ideas? Thanks for the quick reply!
  15. D

    RE. Honda gx160 help!!?

    Hi guys, I've just changed the drive shaft in my honda hx160 without any problems using advice from here. Anyway I've just gone to try to start it and nothing happens! Was really really well before but nothing is happening! Any ideas guys? Thanks so much Darren
Top