2019 - Yerf Doge

Kartorbust

Well-known member
Messages
3,896
Reaction score
188
Location
Utica, NE
30 series belts will probably not hold up to a 13hp engine, for very long. Tops is supposed to be 8hp.
 

Dingocat

Broke
Messages
722
Reaction score
159
Location
NE Ohio
They stated that it was the engine's fault. oil on the TC but still. Dumb idea almost ending really bad. looked cool but poorly designed, like half their stuff lol.
 

Kartorbust

Well-known member
Messages
3,896
Reaction score
188
Location
Utica, NE
They probably could avoid 99% of their problems if they wouldn't half bake their builds. Keep saying "It'll be fine" and I'll guarantee, next time you'll probably be in the ER.

Anyway, any updates yet?

https://www.gokartsupply.com/mobile/4044seri.htm might be a better idea to get a 40. Excuse the mobile part, I'm mostly on my phone on here.
 

J.S.@SMS

Road Hazard
Messages
866
Reaction score
4
Location
Weeki Wachee Fl.
They've got them in Florida. But could you give us a bit more detail on what happened with the chain and the clutch and the frame. And to quote a star, "your words make my head sad."
 

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
They've got them in Florida. But could you give us a bit more detail on what happened with the chain and the clutch and the frame. And to quote a star, "These words make my head sad."

Well the yerfdoges rear sub frame cracked and broke right on a gusset its to wet for me to take a pic because i dont want to sink in the mud. And how the subframe twisted from that the chain hits the clutch and wont allow it to move
 

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
Its alive!

so it runs now yay! i had to make a notch in the idle screw so it would start and run. also i had to make a new bushing for the tc because the one that came with it was for a 3/4th inch shaft and mine is a 1inch, so i used bmx peg and cut it for a new one. im going to do my best to make it smooth enough so the tc doesnt engage when started. but i also need a masterlink, and have no money for that. Heres a video of it running i got my throttle arm working too!
https://youtu.be/PqSSeDv7fhU
 

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
Update 10

It runs and DRIVES! I just drove it its slow not tuned well backfires like crazy wayway out of tune threw a few bolts needs the tc bushing i made, shortened because it is too wide
 

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
Update 11!

Been a while since i updated...
Currently the battery is dead and the engine wont charge it enough because it still runs like crap. If anyone wants to help me out and find an subaru eh41 carb i really really need one mine is junk. My grandpa is almost done moving to his new house and i struck a deal with him im giving him my manco 445, and a crappy frame i got for just the engine off of it, and my manco mini bike with a 3hp briggs. Which means he is fixing everything wrong with yerfdoge, my kenbar and swapping my rat mower. And for those who thing im not gonna help... **** ya im gonna help im not letting him have all the fun!
 

Attachments

  • 20190908_183724.jpg
    20190908_183724.jpg
    325.4 KB · Views: 9
  • 20190908_174628.jpg
    20190908_174628.jpg
    336.7 KB · Views: 10
  • 20190907_182644.jpg
    20190907_182644.jpg
    153.8 KB · Views: 9
  • 20190907_112649.jpg
    20190907_112649.jpg
    240.1 KB · Views: 11

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
Update 12!

Well yerfdoge has been sitting because i dont have a battery charger only a jumper and the tire went flat in the front also the large zipties holding the gas tank on broke.
How would i mount a pulse fuel pump up i dont know much how it works but it came off a honda 5hp i need to mount the tank and a pulse fuel pump so it gets a steady stream of gas and doesnt do a stupid pulsy thing.
 

Attachments

  • 20191002_094403.jpg
    20191002_094403.jpg
    177.3 KB · Views: 5
  • 20191002_094335.jpg
    20191002_094335.jpg
    139 KB · Views: 4
  • 20191002_094333.jpg
    20191002_094333.jpg
    195.4 KB · Views: 6
  • 20191002_094327.jpg
    20191002_094327.jpg
    263.5 KB · Views: 7

Budget GoKart

Aka a kenbar
Messages
2,195
Reaction score
118
Location
roachdale, indiana
Well I traded my bristers thunder kart for an 8hp briggs straight piped, after market carb. Pretty sure nothing works yet I can't bolt it down or anything so I think I'll trade for the guys other big block briggs. I may also trade the subaru for something else of his. But here's a current pic I'm diggin the exhaust.
 

Attachments

  • 20191109_102624.jpg
    20191109_102624.jpg
    295.8 KB · Views: 14
  • 20191109_102847.jpg
    20191109_102847.jpg
    357.5 KB · Views: 10
Top