Denny
Canned Monster
So don't be surprised when you see a Ford WATERPUMP with a wastegate![/QUOTE]
My engine tuning, performance, and short rides.
- Thread starter FreeRunner15
- Start date
- Status
ChromeRhino
New member
Actually rotary vane superchargers have been around since the early 1950's at least. They were very popular especially in Europe with all their small cars they have there. There are also historical facts backing up everything I have advised him on. So before you go popping off at the mouth maybe you should do some reading and studying on your own.
Denny
I know there is actual good info and historical facts, and I actually HAVE researched the Ford smog pumps and know they are a mod people actually do... thats the reason its like giving dynamite to a 10 yr old... its REAL information that can actually make more power. The M80 is his popcorn machine he has now and the dynamite is tge info your providing which will give him an actual screamer of an engine. I'm worried what could happen with gis popcorn machine, let alone what he would do with an engine that produces a decent amount of power. Get it?
ezcome-ezgo
G'me sumthin to write on
I know what might happen: Crash, burn, everyone wins.
Poboy kartman
Senior Moments Member
Ahhhh....but you forget! ! He still has that other engine, all that wood, and bicycle wheels!
FreeRunner15
=======
i think thats the best idea you've given me. unfortunately i'm still gonna have to take your belt and beat you with it. with the belt buckle on it.
---------- Post added at 11:52 AM ---------- Previous post was at 11:26 AM ----------
a TURBOchager that runs with air from the valve cover.
awesome idea po boy. its cheaper than a smog pump too
---------- Post added at 12:29 PM ---------- Previous post was at 11:52 AM ----------
If anyone has a better idea for a pump-turbocharger let me know. i'd be willing to try it as long as its less then $40. 50 tops.
ezcome-ezgo
G'me sumthin to write on
This is juvenile and tiresome.
FreeRunner15
=======
It isn't the black mamba but it will have to do.
276lift 239 duration
Next will probably be a gx390 carburetor convert and then live axle stuff with nitro experimentation. either nitropropane or a nitrometh/methanol blend.
Even got ma eBay welding machine in
https://www.youtube.com/watch?v=sqahdSb2N5I
cant wait to wire a plug and put this hing to use.
276lift 239 duration
Next will probably be a gx390 carburetor convert and then live axle stuff with nitro experimentation. either nitropropane or a nitrometh/methanol blend.
Even got ma eBay welding machine in
https://www.youtube.com/watch?v=sqahdSb2N5I
cant wait to wire a plug and put this hing to use.
bob58o
SuckSqueezeBangBlow
Have you read up on the 390 carb? It has some issues on acceleration from idle. I'm working on the cure now! lol
Poboy kartman
Senior Moments Member
Well...don't bother....you'll have plenty of old ruined TC belts you can use instead!
I've got an idea for you: a morphine pump. You're gonna wind up with one eventually, anyway!
FreeRunner15
=======
i did read that. but it's okay i have idle problems with my stock carb anyway. But i did also read the smaller carb maintains a good velocity and will be good for a considerable amount of horsepower.
Have you tried high number jet yet ?
chancer
ɔ ɥ ɐ u ɔ ǝ ɹ
Congrats on the Welder!
What will you build first?
What will you build first?
Poboy kartman
Senior Moments Member
There....I fixed that for ya!
(I think in this case...he should forgo the helmet for the first few hours for sunglasses....you can see what you're new welder is doing better that way! ) JK... Kids...don't try that...(or anything this guy does at home!)
bob58o
SuckSqueezeBangBlow
Haven't tried messing with the jets just yet. I move slow. Still researching carb basics (mainly the different circuits, the emulsification process, accelerator pumps)
I'm about to post some good E-Tube info on my engine thread.
Best of Luck. I'm glad you bring up your Mod ideas so I can test the water before I toss my ideas out there.
FreeRunner15
=======
" I'm busy, go ask Siri." and let me know the results
lol---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------
Best of Luck. I'm glad you bring up your Mod ideas so I can test the water before I toss my ideas out there.
i am curious about the nitrous idea now. i cant afford it but i would try it with a pinhole-sized jet with that insulator i showed you at AGK.
chancer
ɔ ɥ ɐ u ɔ ǝ ɹ
" I'm busy, go ask Siri." and let me know the results
Here is what Siri said:
https://www.youtube.com/watch?v=xOhq_cjOGNo
FreeRunner15
=======
chancer
ɔ ɥ ɐ u ɔ ǝ ɹ
Finally You surrender, and Yes he has been beating a dead horse for a while Now!
Nice Post
Nice Post
FreeRunner15
=======
---indeterminate--
Well... i'm going to fix the steering wobble then finish up reinforcing the rear extension that took a LOT of force to even bend slightly straight with a tractor blade. Who knows? me being me i might fabricate a permanent live axle with high gearing with the engine in the center of it. call me crazy I won't deny it.
bob58o
SuckSqueezeBangBlow
I asked SIRI this awhile ago based off a FaceSpace suggestion. I pee'd my pants and removed the FB app. Now I only ask SIRI what is the best location to put a body.
- Status