idles perfect but cant touch gas pedal

[kart bruiser]

nice try just tried it cause i was at autozone when your entry came in
just so frustrating to know it ran perfect before i replaced all electrical
does 50cc or 150cc have any difference on stock cdi or coil wire for that matter ?
they were both listed as ok for either and my motor started right up perfect just wont react to pedal without dying aaaaawwwwg

 

[kart bruiser]

he picks up kart on sunday
my work is done all new electrical and starts fine so truly rest is up to him but me being duly sworn to repair everything i touch LOL i cant let it be

 

[kart bruiser]

if they could just reduce tire prices for kart size tires 4,5,6,7, and 8s up to 18.5

 

[2SlickNick]

nice try just tried it cause i was at autozone when your entry came in
just so frustrating to know it ran perfect before i replaced all electrical
does 50cc or 150cc have any difference on stock cdi or coil wire for that matter ?
they were both listed as ok for either and my motor started right up perfect just wont react to pedal without dying aaaaawwwwg

Did you get a cheapo CDI from ebay?
do you still have the stock CDI? It is a Dc cdi. And the ASW CDI's are really good ones. Try the stock one and see what happens.

 

[kart bruiser]

i was thinking of putting the stock cdi and stock coil on but one is malfunctioning dont know which one replaced them at same time so am wondering will one make the other break or vice versa or can i plug and play till i get it right ? so to speak

 

[kart bruiser]

and it is ac cdi bought from ebay for 9.85
same story for coil

 

[kart bruiser]

man it raining and i am such a die hard i was gonna go out there and change it out anyway,LOL

 

[2SlickNick]

and it is ac cdi bought from ebay for 9.85
same story for coil

Get that cdi off!!
Your helix Is Dc powered....
I doubt the stock cdi is bad they hardly ever go bad.
A coil is a coil.

 

[kart bruiser]

could the valves be running strong shut it down for 3 and half months fix and repair electrical and upon startup valves be out enough to cause this issue?

 

[firemanjim]

could the valves be running strong shut it down for 3 and half months fix and repair electrical and upon startup valves be out enough to cause this issue?

Ehh, I doubt it. I think its electrical, not mechanical. Cdi's are purpose built. I bought a chinese "high performance " 2stroke cdi and it DID make my quad faster, as advertised. Only $20.... To my door.
As previously stated, try your old cdi.... It might actually fix the problem..... I hope anyway.....

 

[2SlickNick]

Let me know once you put the stock cdi in.....
I can't reiterate enough you have a DC powered machine!

 

[2SlickNick]

FYI a DC powered machine is is already pretty much at the top if its game CDI wise.
All the ac powered CDI's are converting it to Dc to get more power.

 

[firemanjim]

and it is ac cdi bought from ebay for 9.85
same story for coil

Dohh! Yours IS DC.......

 

[kart bruiser]

well put new carb on and did exact same thing BUT when i started turning key to fil up float bowl it ran fine fgor just a couple seconds before and it was warmed up
is it possible that valves are ok for idle but even the slightest bit more they comingle gases and shutdown ?

 

[2SlickNick]

well put new carb on and did exact same thing BUT when i started turning key to fil up float bowl it ran fine fgor just a couple seconds before and it was warmed up
is it possible that valves are ok for idle but even the slightest bit more they comingle gases and shutdown ?

Are you even reading what we wrote?!?
Cdi???????
Did you put the stock one back in???
This is too frustrating!I am done trying to help until you put the stock CDI back in. The we can go from there...........

 

[Poboy kartman]

What's that saying?????? You can lead a horse to water.....but you can't talk to his azz?

 

[n3480h]

Wait! Are you guys telling us that valves don't actually GROW longer when an engine has been shutdown for 3 months??? Hunh - who'da thunk it.

 

[firemanjim]

 

[Jim4626]

just taking a guess but check the pickup. it sounds like the pickup cant keep up with the flywheel and produce spark at higher rpms

 

[Poboy kartman]

Hey.......pass me a couple. ......thanks